Teletek electronics ECLIPSE 16 Engineer Programming Manual page 42

Alarm control panels
Table of Contents

Advertisement

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
ADDRESS
Z1
OPERATION
KSWITCH
TEXT MENU
Setting of Key-Switch Attributes for Zone 01
At this address are assigned only attributes for Key-Switch type zone.
More than one attribute can be assigned for the zone. Pressing a digital button with the respective
number will activate a given attribute. Every activated attribute number is indicated as a lighting on
LED or display the zone name and number. Pressing the same digital button again will deactivate
the attribute.
To select all attributes press button "0" – the button alternatively switches over all enabled / all
disabled state.
The following Attributes are available for setting at this address:
No
1
2
3
4
5
Default setting: 1. PULSE, 5. NORMAL
2016
216 + 01
4. INPUTS – 5. ZONES – 01. ZONE – 6. KEY SWITCH
Attribute
24-hour Key-Switch type zone.
With assigned Pulse attribute () - every impulse will change
alternatively the arming status of the system - respectively armed/
disarmed.
With assigned Latch attribute (1) - if the zone is activated - the area(s)*
is armed, if the zone is in normal operating status - the area(s)* is
PULSE/
disarmed.
LATCH
*The area(s) to which the zone is associated.
Attention: When the "Pulse" () attribute is set - if Zone 01 is attached to
more than one area, and at least one area is Armed, the incoming pulse
signal will disarm all of the attached to Zone 01 areas. The next incoming
pulse signal will Arm all of the attached to Zone 01 areas.
Key SWITCH
Setting the ARMING type
ARM type
The attributes 2 and 3 are set in a certain combination for programming
the Arming type of the Key-Switch type zone:
2
Key SWITCH
ARM type
2
2
This attribute determinates whether the zone will disarm the system:
DISARM
DISARM ENABLED (4) or not - DISARM DISABLED ().
NORMAL/
Normal or inverted operation of the zone. In case of setting the INVERT (5)
INVERT
attribute, the system will be disarmed in zone activation.
3
Arming type
Not used
3
Full Arming mode
Stay Arming mode
3
Sleep Arming mode
42
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eclipse 8Eclipse 32

Table of Contents