Teletek electronics ECLIPSE 16 Engineer Programming Manual page 74

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
ADDRESS
DEV 01
OPERATION
ID
TEXT MENU
Identification number for Device 01.
The Device 01 is always the control panel, and it is performed at the LCD display with it is unique
name [MAIN] and ID number. The indication on the LED keyboards is lighting on Zone 01.
This address is only for review.
8010>DEV1_ID
[MAIN][XXXXXXXX]
Default setting: MAIN
ADDRESS
DEV 01
OPERATION
AREAS
TEXT MENU
Association of Areas to Device 01
According the system configuration the engineer associates one or several AREA numbers for
operation with Device 01. To select an AREA press the digit button corresponding to its number.
The next pressing of the same button will deselect the AREA.
To select all areas press button "0" – the button alternatively switches over all enabled / all disabled
state.
Default setting: AREA 1
ADDRESS
DEV 01
OPERATION
RESOURSES
TEXT MENU
On board resources of Device 01.
At this address, the engineer can check the on board resources (number of available zone inputs
and PGM outputs) for Device 01. This address is only for review.
Indication:
LCD 32 (S): The maximum number of Inputs and Outputs is display on the screen.
LED 32: The maximum number of Inputs and Outputs are reviewed with the help with the arrows.
When reviewing the Inputs number the LED "A1" is lighting on, zone 15 is blinking and zone number
from 1 to 8 is showing the number of inputs. When reviewng the Outputs number the LED "A2" is
lighting on, zone 15 is blinking and zone number from 1 to 8 is showing the number of outputs. Note
that Zone 10 corresponds to no inputs/ outputs available for the device.
LED 8/ 16A: The maximum number of Inputs and Outputs are reviewed with the help with the
arrows. When reviewing the Inputs number the zone 1 is blinking and a lighting digit button shows
the number of available inputs for the device. When reviewing the Outputs number the zone 2 is
blinking and a lighting digit button shows the number of available outputs for the device.
8010
810 + 01
9. DEVICES – 01. DEVICE [MAIN] – 1. ID
Name and ID number of the DEVICE 01
[MAIN][XXXXXXXX]
Special ID number unique for
every device.
System Name
8011
811 + 01
9. DEVICES – 01. DEVICE [MAIN] – 2.AREAS
8013
813 + 01
9. DEVICES – 01. DEVICE [MAIN] – 4. RESOURCES
74