Teletek electronics ECLIPSE 16 Engineer Programming Manual page 26

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
To restore the default parameters for a menu press the respective digit button (in operation with 4-
and 3-digit addresses):
Button 0 – Menu 0. General Settings
Button 1 – Menu 1. Users
Button 2 – Menu 2. Zones
Button 3 – Menu 3. PGM Outputs
Button 4 – Menu 4. Areas
Button 5 – Menu 5. Time Slots
Button 6 – Menu 6. Communicator
Button 8 – Menu 8. Peripheral Devices
ADDRESS
RESET MNG OPERATION
TEXT MENU
Main Manager Code Reset
Restoration of the default main manager code (User 01). Buttons 1, 2, 3, 4, 5, 6 are pressed in
succession and confirmed with the ENTER button.
The system restores the default 0000 manager user code.
Default Main Manager Code: 0000
ADDRESS
LOG EVENT OPERATION
TEXT MENU
Memory LOG Events
Review of memory LOG events in the system.
The memory LOG file is with different capacity: 256 (ECLIPSE 8) and 1024 (ECLIPSE 16/ 32)
system events. The events recorded in the power independent memory of the control panel can be
traced with the help of the arrows. The first event which is visualized is the last recorded.
Use the digit button 2 to review some additional information for the event such as user, zone or area
number.
In case of using a LED keyboard to review the memory LOG file, keep in mind that the visualization
of the memory events is presented with hexadecimal values. For correct reading the information use
the table for the events in the APPENDIX 2.
ADDRESS
SYSTEM
OPERATION
NAME
TEXT MENU
Programming of the System Name
The engineer can enter a new system name at this address. The name has to be up 16 symbols –
letters (small and capital), digits and special symbols, including spaces.
The letters can be entered directly by the digit buttons. The cursor moves automatically to the right
after choosing of letter or digit, or may be moved manually by the arrows. To enter a digit press the
respective button and hold it for 2-3 seconds. See also item 2.8. Entering text for LCD Keyboard.
Confirm the new system name with ENTER button.
Default system name: << TTE >>
0032
032
2. SETTINGS – 10. RESET MNG
0040
040
1. MAINTENANCE – 1. VIEW LOG
0050
050
2. SETTINGS – 11. SYSTEM NAME
26