Teletek electronics ECLIPSE 16 Engineer Programming Manual page 25

ADDRESS
COMM TEST OPERATION
TEXT MENU
The performance of the communicator can be directly monitored at this address.
Before starting the monitoring of the communicator performance, you have to enter a telephone
number at ADDRESS 6010.
The FULL Arm (
station and from the voice dialer to assigned telephone numbers. The 0 button aborts any running
communication and deletes the queue of events to be sent.
The meaning of the symbols is given below, as the "active state" means permanent lighting of the
LEDs (LED keyboard) or step number (LCD keyboard).
After communication has been successfully completed, the keyboard emits a sound signal. The
CLEAR button exits Address 0023.
Button
1
2
3
4
5
ADDRESS
HWR RESET OPERATION
TEXT MENU
Hardware Reset Enable
Specialized service is required where the hardware RESET is disabled and the engineer code is
obscure.
The parameter status can be changed with pressing of random button of the keyboard.
At this address, you set the parameter as:
DISABLE
ENABLE
Parameter by default: ENABLE
ADDRESS
SELECT
OPERATION
MENU
TEXT MENU
Partial software reset of a programming menu.
The engineer can make a partial reset and to restore the system parameters for a certain
programming menu at this address. Enter a number from 0 to 8 (except 7) and press ENTER. The
system will ask for a confirmation password – enter in sequence the service code 123456 and press
ENTER. The system will restore the default settings only for the chosen menu.
0023
023
1. MAINTENANCE – 4. COMM TEST
) button causes test transmission from the communicator to the central
/
Action
Dialing the telephone number.
Waiting for „handshake" signal from the monitoring station.
Transmitting data to the monitoring station.
Waiting for confirmation signal from the monitoring station, 'kissoff' signal.
Communication process has been completed and all data has been successfully
transmitted to the central station.
0030
030
2. SETTINGS – 08.HWR RESET
The hardware reset is not allowed.
The hardware reset is allowed.
0031
031
2. SETTINGS – 09.PART DEFAULT
Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
25