Led Indication For The System Status; Buttons For Programming And Operation; Switch For Changing Over Between Access Levels 1 And 3 - Teletek electronics MAG2 User Manual

1.4 LED indication for the system status:

LED
FIRE
(red)
GENERAL FAULT*
(yellow)
sOUNDER FAULT/DIsABLE*
(yellow)
ENABLE / DIsABLE
(yellow)
TEsT
(yellow)
POWER SUPPLY 230V
(green)

1.5 Buttons for programming and operation:

Button
sILENCE BUZZER
sILENCE ALARM
ENABLE / DIsABLE Enabling / Disabling of Zones / Sounders.
TEsT / sCROLL
REsET
sOUND ALARM
1.6 switch for changing over between Access Levels 1 and 2:
Position
OFF Access Level 1 - only the "SILENCE BUZZER" button is active.
ON Access Level 2 - all buttons at the front panel are active.
* NOTE: Fault conditions will not be announced instantly. There will be a short delay
which will vary from condition to condition. Faults when cleared will automatically reset
at the panel.
6
Fire in the premises.
Main Fault indicator.
Trouble in the sounder circuit - open or short circuit;
reverse connected sounder.
Lights permanently at disabled zones/sounders.
Blinks during enabling/disabling of zones or
sounders.
Blinks during "One Man" Test together with the LED
of the tested zone.
Lights on permanently in normal operating mode,
indicates presence of main power supply 230V.
Deactivating the internal buzzer.
Deactivating sounders.
Test mode; Scroll forward zones.
Initialization; Confirm the introduced changes.
Activating sounders.
Description
Indication
Description
Fire Control Panel MAG2/4 - User Manual