Programming By Manager; Programming By User; Directions For Operation With Lcd Keyboards; Entering Text With Lcd Keyboards - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/ 16/ 32 Series – User Operation Manual

2.6.2 Programming by Manager

After manager code is entered, a confirmation beep is heard from the keypad. Entrance in
programming mode by a manager is done by pushing the PRG (
lit on the keyboard display, while the „lightning" (white) and „padlock" (red) LEDs flash
only on the keyboard, which is being used. The system expects entrance of 2-digit code
for programming by manager. When a digit button is pushed the corresponding zone LED
lights up. When the "0" button is pushed zone number 10 lights up (button 0 for LED 8).

2.6.3 Programming by User

Users in the system do not possess manager rights. Every code with forbidden option 8
Manager (programmed by the manager of the system) is a user code.
After user code is entered a confirmation beep is heard from the keyboard. Entrance in
programming mode by a user is done by pushing the PRG (
the keyboard display, while the „lightning" (white) and „padlock" (red) LEDs flash only on
the keyboard, which is being used. The system expects entrance of 1-digit programming
address by a user.

2.7 Directions for Operation with LCD Keyboards

The LCD32 and LCD32 Sensitive are keyboards for management and control with text
LCD displays.
To enter codes, addresses and parameters use the digit buttons. For arming the system
can be used neither the quick buttons with the respective pictograms, or to choose the
arming type from the screen scrolling with the arrows and confirmation with ENTER
button. Use the provided further on detailed descriptions of the all addresses in the
system. To exit the manager or user programming menu press CANCEL button several
times until return to main screen in normal operation mode.
Attention: If no action (pushing a button) is performed for 30 sec. after entering the
manager or user programming menu, the system automatically returns to the main screen
and is again in normal operation mode. Entrance in programming mode by a manager or
user is possible via more than one keyboard at the time even with the same code.

2.8 Entering Text with LCD Keyboards

The keyboard models LCD32 and LCD32 Sensitive support text entering including small
and capital letters, digits, punctuation marks and other specific symbols.
The regular letters and digits can be entered directly by the buttons. It is possible to enter
text up to 16 symbols including space. Use the STAY ARM button to enter capital letters
and button DISARM to delete a symbol. MEM button provides entering of special
symbols.
Tables for correspondence of the buttons:
Button
0
1
2
3
4
Letters, digits
_ 0
1
a b c 2
d e f 3
g h i 4
Button Letters, digits
5 j
6 m
7 p
8 t
9 w
10
) button. Two digits are
) button. One digit is lit on
k l 5
n o 6
q r s 7
u v 8
x y z 9