Table of Contents
Advertisement
Chapter 4
Basic Settings
This chapter explains how to use the Basic Setting utility to configure the Internet access settings of the router.
To use the Basic Setting utility:
1.
Launch your browser and enter the router's IP address in the URL field using the following format:
http://192.168.123.254
The IP address shown is the default IP address of your router.
Note
The router is pre-configured at the factory with a default IP address of 192.168.123.254. If this IP address is already being
used by another device on your network, you must turn off the other network device until you have assigned the router
a new IP address.
The first Web page you see is the Login screen, as shown in Figure 11.
2.
Enter the administrator's password (the default has no password set.).
3.
Click the Basic Settings item in the left-side window to start the utility.
28
Figure 11. Login Screen.
Advertisement
Table of Contents
