6.1.1
PWA-DWNLD-350-JIG2 (48 MB)
The master data written on the hard disk can be updated by using PWA-DWNLD-350-JIG2 (48 MB).
Update the master data according to the need such as the case of replacing the hard disk.
The data to be overwritten are as follows.
•
HDD program data (RIP data, list data, Web data, filing box control data)
•
UI data (fixed section data, common section data, the language 1 to 7 data, the language 1 to 6 data
for Web)
[A]
Update procedure
Important:
•
Use the download jig "PWA-DWNLD-350-JIG2 (48 MB)".
•
Turn OFF the power before installing and removing the download jig.
•
Do not turn OFF the power during the update. The data could be damaged and not be oper-
ated properly.
(1)
Write the data to the download jig.
P.6-20 "6.1.3 Writing the data to the download jig (PWA-DWNLD-350-JIG)"
(2)
Turn OFF the power of the equipment.
(3)
Remove the cover plate.
e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
Cover plate
Fig.6-4
6 - 4
June 2004 © TOSHIBA TEC