Toshiba e-studio200l Service Manual page 541

18)Image dislocation in feeding direction
Defective area
Scanner/Printer adjust-
ment
Registration roller
Feed clutch
Pre-registration guide
June 2004 © TOSHIBA TEC
Fig. 5-18
Step Check items
1 Have the printed images been dislo-
cated in the same manner?
2 Is the registration roller dirty, or the
spring detached?
3 Is the registration roller working prop-
erly?
4 Is the feed clutch working properly?
5 Is the pre-registration guide installed
properly?
5 - 111
Prescription
Adjust the position of the leading
edge of paper in the Adjustment
Mode.
Clean the registration roller with alco-
hol.
Securely attach the springs.
Adjust or replace the gears if they are
not engaged properly.
Check the circuit or feed clutch, and
replace them if necessary.
Install the guide properly.
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5