Toshiba e-studio200l Service Manual page 145

Classifi-
Code
cation
483 Laser Pre-running rotation of
polygonal motor
484 Laser Polygonal motor rotational
status switching at the Auto
Clear Mode
485 Laser Rotational status of polygo-
nal motor on standby
486 Laser Timing of auto-clearing of
polygonal motor pre-run-
ning rotation
488 Laser Setting of polygonal motor
type
489 Laser Polygonal motor rotation
number on standby
490 Laser Polygonal motor rotation in
the energy saving mode
June 2004 © TOSHIBA TEC
Setting mode (08) <e-STUDIO200L/230/280>
Default
Func- <Accept-
Items
tion
value>
ALL
ALL
ALL
Others: 0
ALL
ALL
ALL
ALL
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 109
04/09
RAM Contents
able
0 SYS Sets whether or not
<0-2> switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the RADF
or the platen cover is
opened.
0: Valid (when using
RADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
RADF only)
0 SYS Sets whether or not
<0-1> switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
JPN: 1 SYS Sets the rotational sta-
tus of polygonal motor
<0-1> on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)
1: Stopped
0 SYS Switches the polygonal
<0-2> motor to the standby
rotation when a certain
period of time has
passed from the pre-
running. At this code,
the period to switch the
status to the standby
rotation is set.
0: 15 sec.1: 30 sec.
2: 45 sec.
* This setting is effec-
tive when "0" or "2"
is set at 08-483.
0 M Set the type of polygo-
<0-3> nal motor.
0: 2-clock type
1: 3-clock type
2: 4-clock type
3: 4-clock type
5 M 0: 38,090.55 rpm
<0-5> 1: 35,000 rpm
2: 30,000 rpm
3: 25,000 rpm
4: 20,000 rpm
5: 10,000 rpm
0 M 0: Stopped
<0-1> 1: 10,000 rpm
Proce-
dure
1
1
1: Invalid
1
1
1
1
1
2