Adjustment Of Skew - Toshiba e-studio200l Service Manual

3.10.3

Adjustment of skew

When an image skew occurs, adjust it according to the following steps, Step 1 Æ Step 2 Æ Step 3.
Note: Note:
Perform this adjustment after confirming that the equipment has been adjusted properly.
Prior to this adjustment, of RADF position and height are needed to be adjusted.
(1) Step 1
Case A:
Adjust the aligning adjustment position to the rear side "-" of the original (
Adjustment of aligning").
Case B:
Adjust the aligning adjustment position to the rear side "+" of the original (
Adjustment of aligning").
A
June 2004 © TOSHIBA TEC
Paper
Original
Fig.3-65
3 - 59
B
White arrow: feeding direction
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
P.3-62 "3.10.5
P.3-62 "3.10.5
3