Toshiba e-studio200l Service Manual page 341

(3) After winding the wires around the pulleys, attach the wire holder jigs not to loosen the wires.
Notes:
• When the wire holder jig is attached, make sure that the wire is not shifted or loosened.
• The wire should come out of the slot of the wire holder jig and be passed through between the
arm and the jig.
June 2004 © TOSHIBA TEC
Wire holder jig
Fig.3-34
3 - 45
Arm
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3