Toshiba e-studio200l Service Manual page 552

2) Usage
The combination of the values of ID=05 and c5 is used to diagnose whether or not the HDD has a
physical failure when HDD failure is suspected (service call F100-180 or 120 occurred).
Result
ID VALUE
05 0
c5 0
05 From 1 to 999
c5 0
05 Any value
c5 1 or more
05 Either one is at
least 1000.
c5
05 All values are dis-
played as "-------".
c5
3) ID=05 and c5
ID Name
05 Re-allocated Sector Count
c5 Current Pending Sector Count The number of candidate sectors to
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
Low possibility of physical failure
Defective sector has been reassigned and HDD is recovered.
High possibility of defective sector existence. (There will be a
possibility of physical failure depending on the use of HDD.)
High possibility of physical failure
High possibility of physical failure (A HDD connector, harness
or SYS board may be one of the causes.)
Description
The number of sectors reassigned
be reassigned
Description
5 - 122
05/11
Diagnosis
HDD replacement
is not required.
HDD replacement
is not required.
HDD replacement
is recommended.
HDD replacement
is recommended.
HDD replacement
is recommended.
Remarks
This value tends to increase at
HDD failure.
This value tends to increase at
HDD failure.
June 2004 © TOSHIBA TEC