Toshiba e-studio200l Service Manual page 366

(3) Close the RADF and check if the positioning
pins fit the holes on the RADF.
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
(2) Loosen the left-hand hinge screw at the rear
side.
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3 - 70
05/11
Fig.3-81
Fig.3-82
Fig.3-83
June 2004 © TOSHIBA TEC