Toshiba e-studio200l Service Manual page 684

<Setting Backup>
(12) Connect the USB storage device to the USB connector (host) on the SYS board.
(13) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
(14) Press the [3] button.
The screen to select the setting backup item is displayed. In this screen, the items to be backed
up are shown after the mark "*". (No items are selected in the screen by default.)
e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
Fig. 9-7
Fig. 9-8
9 - 6
05/11
June 2004 © TOSHIBA TEC