(8)
"Update Completed!!" is displayed at the bottom of the LCD screen after the updating is com-
pleted properly.
"Update Failed." is displayed at the bottom of the LCD screen when the updating is not com-
pleted properly. Turn OFF the power, and then check the following items. After confirming and
clearing the problems, restart updating from the beginning.
•
Is the download jig connected properly?
•
Is the updating data written to the download jig properly?
•
Do the download jig and the equipment operate properly?
e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
Fig.6-14
Fig.6-15
6 - 14
June 2004 © TOSHIBA TEC