(3)
Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Note:
Note:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
[Rear]
Bracket
June 2004 © TOSHIBA TEC
Carriage-1
D
Fig.3-32
3 - 43
[Front]
Exit side frame
Bracket
C
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3