Input Check (Test Mode 03) (E-Studio202L/232/282) - Toshiba e-studio200l Service Manual

2.2.2

Input check (Test mode 03) (e-STUDIO202L/232/282)

The status of each input signal can be checked by pressing the [FAX] button, and the digital keys in
the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
Note: Note:
Initialization is performed before the equipment enters the test mode.
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
June 2004 © TOSHIBA TEC
[FAX] [Digital keys]
[CLEAR]
Fig. 2-3 Example of display during input check
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 31
05/12
(LCD ON)
[POWER] OFF/ON
(Exit)
2