Firmware Updating - Toshiba e-studio200l Service Manual

6.

FIRMWARE UPDATING

In this equipment, following firmware is written on the ROM on each board.
Firmware
Master data (HDD program data, UI data)
System ROM (System firmware, OS data, UI data)
Engine ROM (Machine firmware)
Scanner ROM (Scanner firmware)
NIC ROM (NIC firmware)
(e-STUDIO200L/230/280 only)
RADF ROM (RADF firmware)
Finisher ROM (Finisher firmware)
FAX ROM (FAX firmware)
When you want to update the firmware above or the equipment becomes inoperative status due to
some defectives of the firmware, updating the firmware is available by the following actions.
<e-STUDIO200L/230/280>
• Updating with the download jig
P.6-2 "6.1 Firmware Updating with Download Jig (e-STUDIO200L/230/280)"
• Updating with PC connected
P.6-54 "6.3 Firmware Updating with FSMS (Field Service Manager) (e-STUDIO200L/230/280)"
• Updating with the USB Storage Device
P.6-66 "6.4 Firmware Updating with USB Storage Device (e-STUDIO200L/230/280)"
<e-STUDIO202L/232/282>
• Updating with the download jig
P.6-31 "6.2 Firmware Updating with Download Jig (e-STUDIO202L/232/282)"
• Updating with the USB Storage Device
P.6-80 "6.5 Firmware Updating with USB Storage Device (e-STUDIO202L/232/282)"
Notes:
• Written firmware varies depending on the kinds of the boards provided as service parts. For
updating, only the minimum firmware is installed on the system control PC board, logic PC
board, and scanning section control PC board. No firmware is installed on the NIC board and
FAX board. The latest version of the firmware at the delivery is written on the RADF control
PC board and finisher control PC board.
When any of above boards is replaced with a new one in the field, confirm the other firmware
version used with and then write the suitable version of the firmware.
• The firmware (master data) is not installed on the hard disk provided as a service part. When
the hard disk is replaced with a new one, confirm the other firmware version used with and
then write the suitable version of the firmware.
June 2004 © TOSHIBA TEC
Stored
Hard disk
System control PC board (SYS board)
Logic PC board (LGC board)
Scanning section control PC board (SLG board)
NIC board
RADF control PC board (MR-3016/MR-3020)
Finisher control PC board (MJ-1025)
FAX board (GD-1150)
e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 1
05/11
6