Toshiba e-studio200l Service Manual page 39

Error code Classification
E3E0 Paper transport jam
E400 Cover open jam
E410
E420
E430
E440
E450
E480
E490
E491
E510 Paper transport jam
(ADU section)
E520
E550 Other paper jam
June 2004 © TOSHIBA TEC
Contents
LCF transport jam (Paper not reaching the 2nd
transport sensor): The paper does not reach the
2nd transport sensor after it has passed the LCF
feed sensor.
Transfer cover open jam: The transfer cover has
opened during printing.
Front cover open jam: The front cover has opened
during printing.
PFP side cover open jam: The PFP side cover has
opened during printing.
ADU open jam: The ADU has opened during print-
ing.
Side cover open jam: The side cover has opened
during printing.
LCF side cover open jam: The LCF side cover has
opened during printing.
Bridge unit open jam: The bridge unit has opened
during printing.
Job separator cover open jam: The job separator
cover has opened during printing.
Offset tray cover open jam: The offset tray cover
has opened during printing.
Stop jam in the ADU: The paper does not reach the
ADU exit sensor after it has passed the ADU
entrance sensor.
Jam not reaching the ADU entrance sensor: The
paper does not reach the ADU entrance sensor
after it is switchbacked in the exit section.
Paper remaining jam on the transport path: The
paper is remaining on the transport path when print-
ing is finished (caused by a multiple paper feeding).
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 3
Troubleshooting
P. 5-6
P. 5-22
P. 5-23
P. 5-24
P. 5-25
P. 5-25
P. 5-26
P. 5-26
P. 5-27
P. 5-27
P. 5-8
P. 5-9
P. 5-10
2