Pwa-Dwnld-350-Jig2 (48 Mb) - Toshiba e-STUDIO230L Service Handbook

6.1.1

PWA-DWNLD-350-JIG2 (48 MB)

The master data written on the hard disk can be updated by using PWA-DWNLD-350-JIG2 (48 MB).
Update the master data according to the need such as the case of replacing the hard disk.
The data to be overwritten are as follows.
• HDD program data (RIP data, list data, Web data, filing box control data)
• UI data (fixed section data, common section data, the language 1 to 7 data, the language 1 to 6 data
for Web)
[A] Update procedure
Important:
• Use the download jig "PWA-DWNLD-350-JIG2 (48 MB)".
• Turn OFF the power before installing and removing the download jig.
• Do not turn OFF the power during the update. The data could be damaged and not be oper-
ated properly.
(1) Write the data to the download jig.
P.6-21 "6.1.3 Writing the data to the download jig (PWA-DWNLD-350-JIG)"
(2) Turn OFF the power of the equipment.
(3) Remove the cover plate.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Cover plate
Fig. 6-4
6 - 5
e-STUDIO200L/202L/203L/230/232/233/280/282/283
FIRMWARE UPDATING
6