Toshiba e-studio200l Service Manual page 247

Classifi-
Code
cation
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
1382 Counter Counter for period of time
fuser unit is at energy sav-
ing temperature/Counter
reset
1385 Image Number of output pages
process- (Thick paper 1)
ing
1386 Image Number of output pages
process- (Thick paper 2)
ing
1387 Image Number of output pages
process- (Thick paper 3)
ing
1388 Image Number of output pages
process- (OHP film)
ing
June 2004 © TOSHIBA TEC
Setting mode (08) <e-STUDIO202L/232/282>
Default
Func- <Accept-
Items
tion
value>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 211
05/11
RAM Contents
able
0 M Counts up the heater
control time accumu-
lated (when the equip-
ment is at ready status).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up the heater
control time accumu-
lated (during printing).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up the heater
control time accumu-
lated (when the equip-
ment is in the Energy
Saving Mode).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up when the
registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at the PM support
mode.
0 M Counts up when the
registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
0 M Counts up when the
registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
0 M Counts up when the
registration sensor is
ON. When the counter
value of the fuser roller
is cleared, this counter
value is also cleared in
sync at PM support
mode.
Proce-
dure
1
2
1
1
1
1
1
1