Toshiba e-studio200l Service Manual page 588

(4) Connect the download jig with the jig connector (CN100) on the SYS board.
(5) Turn ON the power while [8] button and [9] button are pressed simultaneously.
The screen for selecting the items to be updated is displayed. "*" is displayed next to the items to
be updated. (All items are selected in the default settings.)
e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
Connector
Fig.6-37
6 - 34
05/11
June 2004 © TOSHIBA TEC