Adjustment Of The Paper Feeding System - Toshiba e-studio200l Service Manual

3.8

Adjustment of the Paper Feeding System

3.8.1 Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. Æ Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig.3-40
Bypass feeding
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig.3-42
June 2004 © TOSHIBA TEC
[Rear]
Center
[Front]
(B)
3 - 49
05/07
The center of the printed image shifts to the rear
side. Æ Move the guide to the rear side (Arrow
(B) direction in the lower figure).
[Rear]
Feeding direction
[Front]
Fig.3-41
Drawer feeding
1) Loosen 2 screws.
2) Move the entire guide to the front or rear side.
3) Tighten the screws.
( B )
( A )
Fig.3-43
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3
Center