Toshiba e-studio200l Service Manual page 390

Setting
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Note: Note:
Perform the shipping position operation when the finisher is packed again.
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
Item
Lower stack tray The lower stack tray moves down
motor (down) and stops when the lower stack tray
lower limit sensor is turned ON.
Stapler motor The stapler motor stops after the sta-
pling operation.
Shipping position The upper and lower stack trays
operation move to the shipping position and
stop.
Operation
3 - 94
To stop
• Press SW2 again.
• Turn OFF the joint
sensor (S4).
• Press the stapler
safety switch (S14).
• Turn OFF the joint
sensor (S4).
• Turn OFF the joint
sensor (S4).
June 2004 © TOSHIBA TEC