Conference, Remote - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Description
The Remote Conference feature enhances the Conference feature by allowing outside parties to dial a
Remote Conference pilot number and a Conference Group number to connect to a Conference call.
The conference circuits on the CPU are used to join each party to the conference. A maximum of 16
conference participants is possible for one Conference. However, the conference call cannot be split
over the CPU's conference blocks. This could limit the number of participants if other conference
circuits are in use.
A maximum of 4 simultaneous Remote Conference calls is possible. The conference call is password
protected so that any user joining the conference would be required to enter a password before being
connected.
• One terminal or trunk needs one conference channel to participate in the conference.
• The conference call cannot be split over the CPU's two conference blocks, limiting the number of
conference participants to 16.
Conditions
None
Default Setting
Not defined
System Availability
Terminals
Multiline and Single Line Terminals
Required Component(s)
None
Related Features
Barge-In
The Barge-In feature cannot be used for an extension user on a Remote Conference call.
Call Forward
The Remote Conference pilot number can not be set as the destination for Call Forward.
Hold
Using Hold while on a Remote Conference call is not possible.
Features and Specifications Manual

Conference, Remote

SL1100
C
1-179