NEC SL1100 Features And Specifications Manual page 318

SL1100
Program Num-
ber
20-02-05
20-02-12
20-09-07
20-13-06
H
Operation
To enable the headset:
1. Plug in the headset into the headset jack on the bottom of the telephone.
2. Program a Headset key (PRG 15-07 or SC 751: 05).
You hear a confirmation beep.
To use the headset:
The Headset key lights when on a call. To disconnect, press the Headset key again.
You can still use the handset for calls or respond to voice-announced Intercom calls with the headset
plugged in. The headset only activates when the Headset key is pressed.
1. Answer a ringing call by pressing the Headset key.
- OR -
2. Press the Headset key and then a line key or press Speaker key then 9 to make a outgoing call.
- OR -
3. Press the Headset key to get intercom dial tone.
- OR -
4. If on a call, press the Headset key to hang up.
1-306
Program Name
System Options for Multiline Telephones - Headset Busy
Mode
System Options for Multiline Telephones - Forced Inter-
com Ring (ICM Call Type)
Class of Service Options (Incoming Call Service) - Call
Queuing
Class of Service Options (Supplementary Service) - Auto-
matic Off-Hook Signaling (Automatic Override)
ISSUE 2.0
Default
0
1
COS 01~15 = 1
Refer to Programming Manual.
Headset Operation