NEC SL1100 Features And Specifications Manual page 33

ISSUE 2.0
4. Dial * .
- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for Single Line Terminals.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected
trunk.
2. Dial * .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial * .
To enter an Account Code at a Single Line Terminal:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to
more information.
*
2. Dial .
3. Enter Account Code (1~16 digits).
4. Dial * .
5. Dial number you want to call.
Features and Specifications Manual
Central Office Calls, Placing on page 1-143
SL1100
A
for
1-21