Table 1-56 Terminal List For Drag & Drop; Table 1-57 Trunk Types; Figure 1-37 Intuition Setup Page 1 - Trunk Setting - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
Package type
000E+4COI 000E can be set to slot 2, 3, 5, 6, 8, or 9.
4COIDB can be set on 084M, 080E, 008E, 000E.
PRI PRI can be set to slot 2, 3, 5, 6, 8, 9, 10, 11 or 12.
Limited one unit (PRI or PRI (T1)) per KSU and two units (PRI or PRI (T1)) per
system.
PRI (T1) PRI can be set to slot 2, 3, 5, 6, 8, 9, 10, 11 or 12.
Limited one unit (PRI or PRI (T1)) per KSU and two units (PRI or PRI (T1)) per
system.
MEMDB+VOIPDB MEMDB+VOIPDB is dedicated to slot 0.
InMail InMail is dedicated to InMail slot.
Terminal type
MLT
SLT
Doorphone
DSS
Intuition Setup Page 1 - Trunk Setting
"Intuition QA" linked to following "Intuition setup page 1". At this screen Trunk type resources can be
configured. Settings are stored once "Next" is clicked.

Figure 1-37 Intuition Setup Page 1 - Trunk Setting

Table 1-57 Trunk Types on page 1-588
page 1".
Features and Specifications Manual
Description
Table 1-56 Terminal List for Drag & Drop
MLT can be set to Multiline Terminal port of 080E and 084M.
SLT can be set to Single Line Terminal port of 008E and 084M.
DoorPhone can be set to Single Line Terminal port No.3 and 4 of 084M.
Maximum 6 Doorphones can be set in a system.
DSS can be set to any Multiline Terminal port of 080E and 084M.
Maximum 12 DSS consoles can be set in a system.
shows the type of Trunks supported at the "Intuition setup
Description
SL1100
Note
(V1.5 Added)
(V1.5 Changed)
(V1.5 Changed)
P
1-587