NEC SL1100 Quick User Manual

SL1100 Multi-Line Terminal
Quick User Guide
MAKING A CALL
Lift the Handset or press Speaker (For the
remainder of this guide we will refer to lifting the
handset but pressing the Speaker key is also valid)
Dial the required internal number
•
For external calls, dial 0 first for an outside
•
line
Ask the caller to please hold:
Press Hold - hold key flashes.
•
You may replace handset if you wish.
•
To retrieve a call:
• Lift the handset.
Press the Flashing Line Key
•
TRANSFER
With a call in progress:
Press Transfer
•
Dial an extension, external number or
•
programmed one-touch key and announce
the call when they answer (optional)
Replace the handset
•
Note: If the called extension is busy or does not
answer, press the Green Flashing Key to return
to your caller. If the extension answers and
indicates that they do not wish to take the call,
ask them to hang up and you will be put directly
back to the original caller.
For additional information search for "NEC SL1100 Multi-Line Terminal User Guide" in your web browser
HOLD
REDIAL
Last dialed number
Lift the handset and press #5 to initiate the
•
call
Recently dialed numbers
Without lifting handset press Redial (Right
•
Cursor key).
Press the Cursor button up or down to
•
search for the required number
Lift the handset to initiate the call
•
CONFERENCE
With a call in progress (internal or external)
Press the More soft key and then the Conf
•
soft key
Dial an internal or external number
•
When the third party answers, press the
•
Add soft key
Repeat the above 3 steps until all parties
are in the conference. Then press the
Begin soft key to begin the conference
Note: Any party may exit the conference by
hanging up. As long as at least one of the
parties is an extension on the phone system the
conference will remain active.