NEC SL1100 Features And Specifications Manual page 851

ISSUE 2.0
To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes), press the key
Use this key... For this feature...
Code: 19 + zone Paging, External
(1~3)
Operation: Press
key
Code: 20 Paging, External
Operation: Press
key
Code: 21 + zone Paging, Internal
(1~8, 1~9 or
01~32)
Operation: Press
Key
Code: 22 Paging, Internal
Operation: Press
key
Code: 23 Meet Me Paging
Operation: Press
key
Code: 24 Group Call Pickup
Operation:
Speaker key +
Press Key
Code: 25 Group Call Pickup
Operation:
Speaker key +
Press key
Code: 26 + Pickup Group Call Pickup
Group (1~32)
Operation:
Speaker key +
Press key + Pick-
up Group
Code: 27 Speed Dialing
Operation: Press
key + bin + Line or
Speaker key
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Code: 29 Repeat Redial
Operation:Place
call + Press key
Code: 30 Save Number Di-
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key +
Press key
Features and Specifications Manual
and enter the code (e.g., 48 for Voice Over).
When you ...
Broadcast to an Ex-
ternal Paging Zone.
Broadcast to all Ex-
ternal Paging
Zones.
Broadcast to an In-
ternal Paging Zone.
Broadcast to all In-
ternal Paging Zone.
Join a Meet Me
Page.
Answer a call ring-
ing another tele-
phone in your Pick-
up Group.
Answer a call ring-
ing a telephone in
another Pickup
Group - if you do
not know the group
number.
Answer a call ring-
ing a telephone in a
specific Pickup
Group.
Dial a stored Sys-
tem Speed Dialing
number.
Dial a stored Group
Speed Dialing num-
ber.
Activate repeat re-
dial while on a call.
Save, redial or
aled check a saved num-
ber.
Key Lamp Status Also see Srvc
On red when activated 703 + zone
On red when activated
On red when activated 701 + zone
On red when activated 701 + 0 or 00
None 763, 764, or 765
None
None
None
None
None
Fast Flash while sys-
tem waits to redial
None
SL1100
Note
Code
703 + 0
* #
769
768
#2 + bin
#4 + bin
-
715
2-21