Download Print this page

NEC SL1100 User Manual

Smart communication server, dt430 terminal.
Hide thumbs

Advertisement

Advertisement

   Summary of Contents for NEC SL1100

  • Page 2

    NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC Corporation.

  • Page 4

    Speaker Extension Number  To change the Trunk Access Code, Ask your NEC Authorized Supplier for the details.  In the default setting, Programmable Function Key No. 1 to 12 is assigned as “Trunk” Key. If you want to assign DSS Keys at the unused Trunk Keys, these unused keys should be erased by “852 + 000” operation before the above operation.

  • Page 5

     The digit of Bin No. depends on the system setting. (0-9<Only Group ABB> / 00-99 / 000-999)  System setting is necessary for Group ABB function. Ask your NEC Authorized Supplier for the details.  Name can be entered by Dial Pad Keys. (See below) ...

  • Page 6

    Trunk Key  Listen to the Dial Tone before dialing a Telephone Number.  You can have function keys for Trunks or Trunk Groups. Ask your NEC Authorized Supplier for the details.  Place an Outside Call <Access by Code>...

  • Page 7

    Select Soft Key - List Select Soft Key On-Hook Condition Press several times to search  Caller-ID function is required to use this operation for outside calls. Ask your NEC Authorized Supplier for more details.  To cancel the Callback operation, press “Exit” Key.

  • Page 8

     Telephone Numbers shall be pre-registered to the system.  System setting is necessary for Group ABB function. Ask your NEC Authorized Supplier for the details.  When you assign the Common ABB Key on the Programmable Function Key, “Press HOLD” is required after dialing the Function Code 27.

  • Page 9

     When the Repeat Dialing is set, Repeat Dial Key shall flash and the system automatically and periodically redials a call. Repeat duration is programmable. Ask your NEC Authorized Supplier for the details.  You should lift the handset when the called party answered.

  • Page 10

    If your call doesn’t go through…  Set a Message Waiting Hear Busy Tone MW Key or No Answer (SC851+38) 2-8 TUE 3:03PM ↓ Voice Msg  When you set a MW, the called party’s Indicator starts to flash, and your Indicator is lit in Green. ...

  • Page 11

    Call Pickup for other Group Key (SC851+25) Extension Number Speaker Specified Extension  System setting is necessary to make Call Pickup Group. Ask your NEC Authorized Supplier for the details.  Call Pickup operations are available by Soft Key operation as well.

  • Page 12

     Retrieve a Held Outside Call Trunk Number you want to retrieve Speaker  For the dial digit of Trunk Number, ask your NEC Authorized Supplier for the details.  Transferring a Call to the other Extension Extension Number Hold...

  • Page 13

     You can repeat this operation to add more parties.  You may be able to have up to 16 parties. (include your terminal) May need to adjust the volume level due to the Environment where calls are placed. Ask your NEC Authorized Supplier for the details.

  • Page 14

    For more Convenient Use…  Call Forwarding / Follow Me When you set Call Forward / Follow Me, the destination extension shall be displayed on the LCD, and the Internal Dial Tone pattern shall be changed. (Call Forward / Follow Me can be set by Soft Key as well) Call Forward Immediate Extension Number Speaker...

  • Page 15

    For more Convenient Use…  Call Forwarding / Follow Me (Cont’d) Call Forward Both Ring Extension Number Speaker Speaker On-Hook Call Forward Cancel Condition Both Ring Key (SC851+14) Call Forward Follow Me Extension Number Speaker Speaker On-Hook Call Forward Cancel Condition Follow Me Key (SC851+15)

  • Page 16

    Soft Keys Operation  Soft Key Operations during Off-Hook condition When you press the Speaker Key or lift the handset, you will see the following Soft Keys. ↓ Press “ ” to switch 2-8 TUE 3:03PM 2-8 TUE 3:03PM Barg Save Dir ↓...

  • Page 17

    Soft Keys Operation  Soft Key Operations after establishing an Intercom Call After establishing an Intercom call, you can use following feature by Soft Key. 2-8 TUE 3:03PM Soft Key Next Operation after pressing Feature Talking to Indication Soft Key Conf Conf Conference...

  • Page 18: Menu Structure

    Cursor Keys Operation  Menu Structure The following table shows the menu structure of the Cursor Keys. You can reach the desired menu by pressing Navigation Keys (Up / Down / Right / Left) or dial 1 digit for shortcut access after pressing the “Enter Key”...

  • Page 19

    Option : In-Mail (Voice Mail) Optional hardware and System setting is necessary to use In-Mail (Voice Mail) feature. Ask your NEC Authorized Supplier for the details.  Log-On to the In-Mail Voice Mail Pilot Number Your Mailbox Number Security Code (if it is set)

  • Page 20

    Option : In-Mail (Voice Mail)  Call Forward to Voice Mail Convenient Operation by Function Key On-Hook Press “Automated Attendant” Key several times to Auto-Attendant Key Condition change the status. (All Calls -> No Answer -> Busy -> Busy/No Answer -> Cancel) (SC851+79 + Ext No.) Forward All Incoming Calls Voice Mail Pilot Number...

  • Page 21

    Option : In-Mail (Voice Mail)  Mailbox Greeting Greeting Greeting No. Return to Option (1-3) Main Menu Record Stop REC Log-On to Recording the In-Mail Listen Finish Listening Erase  Selected Greeting (one of three) shall be made active.  Mailbox Security Code Mailbox Security Code Confirmation...

  • Page 22

    Option : In-Mail (Voice Mail)  Listen to Left Messages in your Mailbox Convenient Operation by Function Key On-Hook Security Code (if it is set) Listen Mailbox Key Condition (SC851+77 + Ext No.) Listening Basic Operation without Function Key Voice Mail Pilot Number Mailbox Number (Unique Dial Security Code (if it is set)

  • Page 23

    Memo...

Comments to this Manuals

Symbols: 0
Latest comments: