NEC SL1100 Programming Manual

Hide thumbs

Advertisement

Table of Contents
Programming Manual
A50-031167-003 NA
ISSUE 6.0

Advertisement

Table of Contents
loading

  Summary of Contents for NEC SL1100

  • Page 1 Programming Manual A50-031167-003 NA ISSUE 6.0...
  • Page 2 Copyright NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC Corporation.
  • Page 3: Table Of Contents

    Section 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN......... 1-5 Section 9 SYSTEM NUMBER PLAN/CAPACITIES............1-5 Section 10 CONCEPT OF SLOT NUMBER..............1-8 Chapter 2 Programming the SL1100 Section 1 PROGRAMMING YOUR SYSTEM..............2-1 Program 10 : System Configuration Setup..............2-3 10-01 : Time and Date..................
  • Page 4 SL1100 ISSUE 6.0 10-54 : License Configuration for Each Package..........2-50 10-58 : Network Address.................. 2-51 10-60 : Audio Port Setup ................. 2-53 10-61 : Relay Port Setup.................. 2-54 10-62 : NetBIOS Setting................... 2-55 10-63 : DHCP Client Setting................2-56 10-65 : NTP Server Setting................
  • Page 5 ISSUE 6.0 SL1100 15-02 : Multiline Telephone Basic Data Setup..........2-128 15-03 : Single Line Telephone Basic Data Setup........... 2-134 15-05 : IP Telephone Terminal Basic Data Setup........... 2-137 15-06 : Trunk Access Map for Extensions............. 2-140 15-07 : Programmable Function Keys............2-141 15-08 : Incoming Virtual Extension Ring Tone Setup........
  • Page 6 SL1100 ISSUE 6.0 20-37 : Operator Extension Group Setup............2-216 20-38 : Operator Group Setting..............2-217 20-42 : Night Mode for each package............2-218 20-43 : Power supply for each package............2-219 20-44 : Watch Mode Setup................2-220 20-45 : Remote Watch Setup................. 2-221 20-46 : Security Sensor Setup...............
  • Page 7 ISSUE 6.0 SL1100 22-18 : Private Call Assignment Setup............2-277 22-20 : Flexible Ringing by Caller ID Setup........... 2-278 Program 23 : Answer Features Setup..............2-279 23-02 : Call Pickup Groups................2-279 23-03 : Universal Answer/Auto Answer............2-280 23-04 : Ringing Line Preference for Virtual Extensions......... 2-281 Program 24 : Hold/Transfer Setup................
  • Page 8 SL1100 ISSUE 6.0 32-03 : Door Box Basic Setup................ 2-335 32-04 : Door Box Name Setup............... 2-336 Program 34 : Tie Line Setup..................2-337 34-01 : E&M Tie Line Basic Setup..............2-337 34-02 : E&M Tie Line Class of Service............2-338 34-03 : Trunk Group Routing for E&M Tie Lines..........
  • Page 9 ISSUE 6.0 SL1100 44-06 : Additional Dial Table................2-397 44-07 : Gain Table for ARS/F-Route Access..........2-398 44-08 : Time Schedule for ARS/F-Route............2-399 44-09 : Weekly Schedule for ARS/F-Route............ 2-401 44-10 : Holiday Schedule for ARS/F-Route........... 2-402 Program 45 : Voice Mail Integration................. 2-403 45-01 : Voice Mail Integration Options............
  • Page 10 SL1100 ISSUE 6.0 82-08 : Sidetone Volume Setup ..............2-485 82-09 : SLIU CODEC Filter Data Setup............2-486 82-11 : SLIU Initial Data Setup............... 2-489 82-12 : OPX Initial Data Setup............... 2-490 82-14 : Handset/Headset Gain Setup for Multi Line Telephone..... 2-491 82-21 : Sensor Setup..................
  • Page 11 ISSUE 6.0 SL1100 90-34 : Firmware Information................. 2-582 90-35 : Wizard Programming Level Setup............. 2-583 90-36 : Firmware Update Time Setting............2-584 90-37 : Set Temporary License..............2-586 90-38 : User Programming Data Level Setup..........2-587 90-39 : Virtual Loop Back Port Reset............. 2-589 90-41 : Server Setting to Update Terminal Local Data........
  • Page 12 SL1100 ISSUE 6.0 LIST OF TABLES Table 1-1 Keys for Entering Data..................1-3 Table 1-2 Keys for Entering Names................... 1-4 Table 1-3 Softkey Display Prompts..................1-5 Table 1-4 System Number Plan/Capacities............... 1-5 Table 2-1 System Numbering Default Settings..............2-59 Table 2-2 Function Number List ..................2-142 Table 2-3 Function Number List ..................
  • Page 13: Chapter 1 Introduction

    In this chapter, you find out about each program, the features that the program affects and how to enter the program data into system memory. This Manual is created for System : SL1100 2 HOW TO USE THIS MANUAL ECTION This section lists each program in numerical order.
  • Page 14: Section 3 How To Enter Programming Mode

    SL1100 ISSUE 6.0 pressed. To learn how to enter the programming mode, refer to How to Enter Programming Mode on page 1-2. 3 HOW TO ENTER PROGRAMMING MODE ECTION To enter programming mode : Go to any working display telephone.
  • Page 15: Section 5 Using Keys To Move Around In The Programs

    ISSUE 6.0 SL1100 The display shows "Complete Data Save" when completed and exits the telephone to an idle mode. To save a customer’s database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the CPU and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the customer data if necessary.) Note that a CF Card can only hold one customer database.
  • Page 16: Section 6 Programming Names And Text Messages

    SL1100 ISSUE 6.0 When you want to ... Telephone Programming Change Program Number Soft Key3 Change Index Number Move Cursor to Right Cursor Key (Right) Soft Key4 6 PROGRAMMING NAMES AND TEXT MESSAGES ECTION Several programs (e.g., Program 20-16 : Selectable Display Messages) require you to enter text. Use the following chart when entering and editing text.
  • Page 17: Section 8 What The Softkey Display Prompts Mean

    Move back through the available program options. Move forward through the available program options. 9 SYSTEM NUMBER PLAN/CAPACITIES ECTION The following table provides the capacities for the SL1100 system. Table 1-4 System Number Plan/Capacities System Number Plan/Capacities Note System Type...
  • Page 18 SL1100 ISSUE 6.0 System Number Plan/Capacities Note System Type Number Plan/Capacities Related Pro- gram Trunk Ports (Total) : • Analog Trunks • T1/PRI Trunk Ports • VoIPDB Trunk Ports (VoIPDB & MEMDB is re- quired. Need license to be Max.) DID Translation Tables 22–10...
  • Page 19 PCPro/WebPro User Name : ADMIN1 Level 4 (SB) 9999 PCPro/WebPro User Name : ADMIN2 Programming Password Users Extension numbers can be one to eight digits long. Refer to the Flexible System Numbering feature in the SL1100 Features and Specifications Manual. Programming Manual...
  • Page 20: Section 10 Concept Of Slot Number

    SL1100 ISSUE 6.0 10 CONCEPT OF SLOT NUMBER ECTION Each unit installed to the system has a slot number assigned. Some of slot number are fixed to a unit that be installed. Other slots are not fixed to unit but fixed to location where it is installed. Below chart...
  • Page 21: Section 1 Programming Your System

    Programming the SL1100 1 PROGRAMMING YOUR SYSTEM ECTION The information contained in this chapter provides the information necessary to properly program your system. The programming blocks are organized into the following programming modes. Program Number : Program Name Program 10 : System Configuration Setup on page 2-3...
  • Page 22: Sl1100 Issue

    SL1100 ISSUE 6.0 Program Number : Program Name Program 93 : System Information on page 2-622 Programming the SL1100...
  • Page 23: Program 10 : System Configuration Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-01 : Time and Date Level: Description Use Program 10-01 : Time and Date to change the system Time and Date through system Program programming. Extension users can also dial Service Code 728 to change the time if allowed by an extension Class of Service.
  • Page 24: Location Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-02 : Location Setup Level: Description Use Program 10-02 : Location Setup to define the location of the installed system. Program Input Data Item Item Input Data Description Default Country Code Dial (up to four digits) : Enter the country code.
  • Page 25: Etu Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-03 : ETU Setup Level: Description Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data for each unit. Program When changing a defined terminal type, first set the type to 0 and then plug the new device in to have the system automatically define it or you may have to reseat the unit.
  • Page 26 SL1100 ISSUE 6.0 For COIU Unit Setup Physical Port Number 1 ~ 4 Item No. Item Input Data Default Logical Port Number 1 ~ 36 For PRIU PKG Setup ISDN Line Number 01 ~ 24 Program Item No. Item Input Data...
  • Page 27 ISSUE 6.0 SL1100 Item No. Item Input Data Description Default Service Protocol for S-point 0 = Keypad facility 1 = Specified Protocol for Aspire sys- Call Busy Mode for S-point 0 = Alerting 1 = Disconnect Two B-Channel Transfer for...
  • Page 28 SL1100 ISSUE 6.0 Item Item Input Data Description Default Number of Ports 0 = Auto 1 = 4 Ports 2 = 8 Ports 3 = 12 Ports 4 = 16 Ports 5 = 20 Ports For VoIPDB PKG Setup Physical Port Number...
  • Page 29: Music On Hold Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-04 : Music On Hold Setup Level: Description Use Program 10-04 : Music on Hold Setup to set the Music on Hold (MOH) source. For internal Program Music on Hold, the system can provide a service tone callers on hold or one of eleven synthesized selections.
  • Page 30: Pre-Ringing Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-08 : Pre-Ringing Setup Level: Description Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets Program how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the trunk LED flashes.
  • Page 31: Dtmf And Dial Tone Circuit Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-09 : DTMF and Dial Tone Circuit Setup Level: Description Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU for Program either DTMF receiving or dial tone detection. The CPU has 16 circuits initially, and an additional 16 circuits are added when a VMDB is installed.
  • Page 32 SL1100 ISSUE 6.0 • Central Office Calls, Placing • Direct Inward Dialing (DID) • Direct Inward System Access (DISA) Program 2-12 Program 10 : System Configuration Setup...
  • Page 33: Cpu Network Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-12 : CPU Network Setup Level: Description Use Program 10-12 : CPU Network Setup to setup the IP Address, Subnet-Mask, and Default Program Gateway addresses. Caution! If any IP Address or NIC settings are changed, the system must be reset for the changes to take affect.
  • Page 34 SL1100 ISSUE 6.0 Item Item Input Data Description Default Time Zone 0~24 (0 = -12 Hours and Determine the offset from Greenwich 24 = +12 Hours) Mean Time (GMT) time. Then enter its respective value. For example, Eastern Time (US and Canada) has a GMT offset of -5.
  • Page 35 ISSUE 6.0 SL1100 Item Item Input Data Description Default Subnet Mask 128.0.0.0 | 192.0.0.0 | Assign the subnet mask for the VoIPDB 255.255.0.0 224.0.0.0 | 240.0.0.0 | card. 248.0.0.0 | 252.0.0.0 | 254.0.0.0 | 255.0.0.0 | 255.128.0.0 | 255.192.0.0 | 255.224.0.0 |...
  • Page 36: In-Dhcp Server Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-13 : In-DHCP Server Setup Level: Description Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the CPU. Program Input Data Item Item Input Data Description...
  • Page 37: Managed Network Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-14 : Managed Network Setup Level: Description Use Program 10-14 : Managed Network Setup to set up the range of the IP address which the Program DHCP Server leases to a client.
  • Page 38: Client Information Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-15 : Client Information Setup Level: Description Use Program 10-15 : Client Information Setup to set up the client information when the DHCP Program server needs to assign a fixed IP address to clients.
  • Page 39: Option Information Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-16 : Option Information Setup Level: Description Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to Program each client. The items highlighted in gray are read only and cannot be changed.
  • Page 40 SL1100 ISSUE 6.0 Item Item Input Data Description Default FTP Server Address Code number 0 ~ 255 Set a FTP Server Ad- 43 (Fixed) dress used for AutoCon- Sub code number fig. IP address 0.0.0.0 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254...
  • Page 41 ISSUE 6.0 SL1100 Item Item Input Data Description Default LDS Server 4 Code number 0 ~ 255 162 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 0.0.0.0 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 Next Server IP Address IP address 0.0.0.0 ~ 126.255.255.254 0.0.0.0...
  • Page 42: Voipdb Dsp Resource Selection

    Selection both IP extensions and sources of the VoIPDB. Resource 2 ~ 32 trunks NEC recommends leaving the default set- 1 = Use for IP exten- tings as system default. sions 2 = Use for SIP trunks 3 = User for Networking (V1.5 Added)
  • Page 43: Lan Setup For External Equipment

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-20 : LAN Setup for External Equipment Level: Description Use Program 10-20 : LAN Setup for External Equipment to define the TCP port/address/etc. for Program communicating to external equipment. Input Data...
  • Page 44 SL1100 ISSUE 6.0 Feature Cross Reference None Program 2-24 Program 10 : System Configuration Setup...
  • Page 45: Sip System Interconnection Setup

    Use Program 10-23 : SIP System Interconnection Setup to determine if the system is Program interconnected and define the IP address of another system, call control port number and alias address for SL1100 system interconnection. Input Data System Number 001 ~ 1000...
  • Page 46: Daylight Savings Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-24 : Daylight Savings Setup Level: Description Use Program 10-24 : Daylight Savings Setup to set the options for daylight savings. As the Program telephone system is used globally, these settings define when the system should automatically adjust for daylight savings as it applies to the region in which the system is installed.
  • Page 47: Ip System Operation Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-26 : IP System Operation Setup Level: Description Use Program 10-26 : IP System Operation Setup to enable or disable the Peer to Peer feature for Program SIP MLT and SIP IP stations.
  • Page 48: Ip System Id

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-27 : IP System ID Level: (This Program is available for V1.5 or higher) Description Program Use Program 10-27 : IP System ID to set the IP address of the networked IP systems.
  • Page 49: Sip System Information Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-28 : SIP System Information Setup Level: Description Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking. Program Input Data Profile 1 ~ 2 (V5.0 Added)
  • Page 50 SL1100 ISSUE 6.0 Conditions None Feature Cross Reference None Program 2-30 Program 10 : System Configuration Setup...
  • Page 51: Sip Server Information Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-29 : SIP Server Information Setup Level: Description Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/ Program inbound. The 10-29 commands are not used in non-registration mode.
  • Page 52 SL1100 ISSUE 6.0 Item Item Input Data Description Default DNS Server IP Ad- 0.0.0.0 ~ If 10-29-08 is 1, this is effective. This sets 0.0.0.0 dress 126.255.255.254 the IP address of the DNS server. 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 (Use Profile 1 Only) (V5.0 Added)
  • Page 53: Sip Authentication Information Setup (Not Used)

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-30 : SIP Authentication Information Setup (Not Used) Level: (This Program is available for V4.5 or lower) Description Program Use Program 10-30 : SIP Authentication Information Setup to set the authentication options for SIP trunks.
  • Page 54: Network Keep Alive Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-31 : Network Keep Alive Setup Level: (This Program is available for V1.5 or higher) Description Program Use Program 10-31 : Network Keep Alive Setup to set the interval and retry count of the AspireNet networking keep alive message.
  • Page 55: Sip Registrar/Proxy Information Basic Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-33 : SIP Registrar/Proxy Information Basic Setup Level: Description Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the registrar/proxy Program options for SIP extensions. Input Data Item Item...
  • Page 56: Sip Trunk Registration Information Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-36 : SIP Trunk Registration Information Setup Level: Description Use Program 10-36 : SIP Trunk Registration Information Setup to set the SIP trunk registration Program information. Input Data Profile 1 ~ 2 (V5.0 Added)
  • Page 57: Upnp Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-37 : UPnP Setup Level: Description Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks. Program Input Data Item Item Input Data...
  • Page 58: Fractional Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-39 : Fractional Setup Level: Description Use Program 10-39 : Fractional Setup to enable or disable the ability to use fractional T1 or PRI. Program Input Data Item Item Input Data...
  • Page 59: Ip Trunk Availability

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-40 : IP Trunk Availability Level: Description Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP trunks and Program assign the number of ports if IP Trunk is enabled.
  • Page 60: Virtual Loop Back Port Setting

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-42 : Virtual Loop Back Port Setting Level: Description Use Program 10-42 : Virtual Loop Back Port Setting to set the data for the Virtual Loop Back Port. Program Input Data...
  • Page 61: Ip Routing Table Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-45 : IP Routing Table Setup Level: Description Use Program 10-45 : IP Routing Table Setup to set up the IP Routing Table. Program Input Data Routing Table Number 001 ~ 100...
  • Page 62: Dr700 Server Information Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-46 : DR700 Server Information Setup Level: Description Use Program 10-46 : DR700 Server Information Setup to set up the information of DR700 Server. Program Input Data Item Item Input Data...
  • Page 63 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Subscribe Ses- 0 ~ 65535 5081 sion Port NAT Mode 0 = Off When the system controls the SIP 1 = On multiline terminal via the NAT router, this system data is set to On.
  • Page 64: Terminal License Server Information Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-47 : Terminal License Server Information Setup Level: Description Use Program 10-47 : Terminal License Server Information Setup to setup the information of Program Terminal License Server. Input Data Item Item...
  • Page 65: License Activation

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-48 : License Activation Level: Description Use Program 10-48 : License Activation to turn on the license issued from the license server. Program Input Data Item Item Input Data Default Software Key Code...
  • Page 66: License File Activation

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-49 : License File Activation Level: Description Use Program 10-49 : License File Activation to enable the command to save the license file via CF Program Card which is issued from the license server.
  • Page 67: License Information

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-50 : License Information Level: Description Use Program 10-50 : License Information to confirm license information that is stored in a system. Program Input Data Feature Code Number 000 ~ 9999...
  • Page 68: Pri/T1 Selection Of Pri

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-51 : PRI/T1 Selection of PRI Level: Description Use Program 10-51 : PRI/T1 Selection of PRI to select whether the unit works as PRI or T1. Program Input Data Slot Number 01 ~ 15 (V3.5 Changed)
  • Page 69: Free/Demo License Information

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-52 : Free/Demo License Information Level: Description Use Program 10-52 : Free/Demo License Information to display information on free of charge/Demo Program license. Input Data Item Item Input Data Default Remaining days of Free/Demo Li-...
  • Page 70: License Configuration For Each Package

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-54 : License Configuration for Each Package Level: Description Use Program 10-54 : License Configuration for Each Package to set the license information for Program each unit. Input Data Slot Number 0 ~ 15 (V3.5 Changed)
  • Page 71: Network Address

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-58 : Network Address Level: (This Program is available for V1.5 or higher) Description Program Use Program 10-58 : Network Address to set the local network address when the SIP Terminal (V4.0 or higher) terminal connects the system via a local router.
  • Page 72 SL1100 ISSUE 6.0 Feature Cross Reference None Program 2-52 Program 10 : System Configuration Setup...
  • Page 73: Audio Port Setup

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-60 : Audio Port Setup Level: Description Use Program 10-60 : Audio Port Setup to defines which audio port on the 084M packages are used Program for BGM/External MOH. Input Data...
  • Page 74: Relay Port Setup

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-61 : Relay Port Setup Level: Description Use Program 10-61 : Relay Port Setup to defines the relay port type on the 084M. Program Input Data Relay Port No. 1 ~ 6...
  • Page 75: Netbios Setting

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-62 : NetBIOS Setting Level: Description Use Program 10-62 : NetBIOS Setting to set the data of NetBIOS. Program Input Data Item Item Input Data Description Default NetBIOS Mode 0 = Disabled...
  • Page 76: Dhcp Client Setting

    SL1100 ISSUE 6.0 Program 10 : System Configuration Setup 10-63 : DHCP Client Setting Level: Description Use Program 10-63 : DHCP Client Setting to set the data of DHCP Client. Program Input Data Item Item Input Data Description Default DHCP Client Mode...
  • Page 77: Ntp Server Setting

    ISSUE 6.0 SL1100 Program 10 : System Configuration Setup 10-65 : NTP Server Setting Level: (This Program is available for V4.0 or higher) Description Program Use Program 10-65 : NTP Server Setting to set the NTP Server. Input Data Item...
  • Page 78: Program 11 : System Numbering

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-01 : System Numbering Level: Description Use Program 11-01 : System Numbering to set the system numbering plan. The numbering plan Program assigns the first and second digits dialed and affects the digits an extension user must dial to access other extensions and features, such as service codes and trunk codes.
  • Page 79: Table 2-1 System Numbering Default Settings

    ISSUE 6.0 SL1100 Dial Types Dial Type Descrip- Related Program Note tion Service Code 11-10 : Service Code Setup (for System Administrator) on page 2-70 11-11 : Service Code Setup (for Setup/Entry Operation) on page 2-73 11-12 : Service Code Setup (for Service Access) on page 2-77...
  • Page 80 SL1100 ISSUE 6.0 Dial Types : 1 = Service Code, 2 = Extension Number, 3 = Trunk Access, 4 = Special Trunk Access, 5 = Operator Access, 6 = Flexible Routing, 8 = Networking Access (V1.5 Added), 9 = Dial Extension Analyze,...
  • Page 81 ISSUE 6.0 SL1100 Dial Types : 1 = Service Code, 2 = Extension Number, 3 = Trunk Access, 4 = Special Trunk Access, 5 = Operator Access, 6 = Flexible Routing, 8 = Networking Access (V1.5 Added), 9 = Dial Extension Analyze,...
  • Page 82 SL1100 ISSUE 6.0 Dial Types : 1 = Service Code, 2 = Extension Number, 3 = Trunk Access, 4 = Special Trunk Access, 5 = Operator Access, 6 = Flexible Routing, 8 = Networking Access (V1.5 Added), 9 = Dial Extension Analyze,...
  • Page 83 ISSUE 6.0 SL1100 Dial Types : 1 = Service Code, 2 = Extension Number, 3 = Trunk Access, 4 = Special Trunk Access, 5 = Operator Access, 6 = Flexible Routing, 8 = Networking Access (V1.5 Added), 9 = Dial Extension Analyze,...
  • Page 84 SL1100 ISSUE 6.0 Feature Cross Reference • Flexible System Numbering Program 2-64 Program 11 : System Numbering...
  • Page 85: Extension Numbering

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-02 : Extension Numbering Level: Description Use Program 11-02 : Extension Numbering to set the extension number. The extension number can Program have up to eight digits. The first/second digit (s) of the number should be assigned in Program 11-01 or Program 11-20.
  • Page 86: Virtual Extension Numbering

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-04 : Virtual Extension Numbering Level: Description Use Program 11-04 : Virtual Extension Numbering to define the virtual extension numbers. The Program extension number can have up to eight digits. The first/second digit (s) of the number should be assigned in Program 11-01 or Program 11-20.
  • Page 87: Department Group Pilot Numbers

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-07 : Department Group Pilot Numbers Level: Description Use Program 11-07 : Department Group Pilot Numbers to assign a pilot number to each Program Department Group set up in Program 16-02. The pilot number is the number users dial for Department Calling and Department Step Calling.
  • Page 88: Trunk Access Code

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-09 : Trunk Access Code Level: Description Use Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access code Program can be set from 1 ~ 4 digits which is defined to type 3 and 4 in Program 11-01. This is the code extension users dial to access Automatic Route Selection (ARS/F-Route).
  • Page 89 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program 2nd Trunk Route Dial (Up to four digits) Use this program to define addition- No Setting • 11-01 : Access Code al trunk access codes. System When a user dials the Alternate...
  • Page 90: Service Code Setup (For System Administrator)

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-10 : Service Code Setup (for System Administrator) Level: Description Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service Program Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11 ~ 11-16.
  • Page 91 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Leaving Message 0~9, , # Maximum of Terminal: MLT 11-11-09 Waiting (Re- 8 digit quires CPU to be licensed for Ho- tel/Motel) Dial Block by Su- 0~9, , # Maximum of...
  • Page 92 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Watch Message 0~9, , # Maximum of Terminal: MLT, SLT Setting 8 digit Service Code setting for Watching message recording to VRS. Warning Mes- 0~9, , # Maximum of...
  • Page 93: Service Code Setup (For Setup/Entry Operation)

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-11 : Service Code Setup (for Setup/Entry Operation) Level: Description Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service Program Codes which are used for registration and setup. You can customize additional Service Codes in Programs 11-10, and 11-12 ~ 11-16.
  • Page 94 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Enable Hands- 0~9, , # Maximum of Terminal: MLT 20-09-05 free Incoming In- 8 digit 20-02-12 tercom Calls Force Ringing of 0~9, , # Maximum of Terminal: MLT 20-09-05...
  • Page 95 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Pilot Group With- 0~9, , # Maximum of Terminal: MLT, SLT drawing 8 digit Toll Restriction 0~9, , # Maximum of Terminal: MLT, SLT 21-14 Override 8 digit Ring Volume Set...
  • Page 96 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Call Forward 0~9, , # Maximum of Terminal: MLT, SLT with Personal 8 digit Greeting Call Forward to 0~9, , # Maximum of Terminal: MLT, SLT 15-01-08 Attendant except...
  • Page 97: Service Code Setup (For Service Access)

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-12 : Service Code Setup (for Service Access) Level: Description Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes Program which are used for service access. You can customize additional Service Codes in Programs 11-10, 11-11, and 11-14 through 11-16.
  • Page 98 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Group Speed Di- 0~9, , # Maximum of Terminal: MLT, SLT aling 8 digit Last Number Dial 0~9, , # Maximum of Terminal: MLT, SLT 8 digit Saved Number...
  • Page 99 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Station Park 0~9, , # Maximum of Terminal: MLT, SLT Hold 8 digit Door Box Access 0~9, , # Maximum of Terminal: MLT, SLT 8 digit Common Cancel- 0~9,...
  • Page 100 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Watch Mode 0~9, , # Maximum of Terminal: MLT, SLT Start 8 digit Service Code (SC) setting for on/off watch mode. SC+1;Watch mode start SC+0; Watch mode end. Security Sensor...
  • Page 101: Service Code Setup (For Acd)

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-13 : Service Code Setup (for ACD) Level: (This Program is available for V1.5 or higher) Description Program Use Program 11-13 : Service Code Setup (for ACD) to customize the Service Codes which are used with the Automatic Call Distribution (ACD) feature.
  • Page 102 SL1100 ISSUE 6.0 Conditions None Feature Cross Reference • Automatic Call Distribution (ACD) Program 2-82 Program 11 : System Numbering...
  • Page 103: Service Code Setup (For Hotel)

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-14 : Service Code Setup (for Hotel) Level: Description Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service Codes which are Program used with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-12, 11-15 and 11-16.
  • Page 104 SL1100 ISSUE 6.0 Item Item Input Data Description Default Set Room to Room 0~9, , # Maximum of 8 Terminal: MLT, SLT Call Restriction digit Determine what the service code should be for an internal party to Set Room to Room Call Restriction.
  • Page 105: Service Code Setup, Administrative (For Special Access)

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-15 : Service Code Setup, Administrative (for Special Access) Level: Description Program Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-14 and 11-16.
  • Page 106 SL1100 ISSUE 6.0 Feature Cross Reference None Program 2-86 Program 11 : System Numbering...
  • Page 107: Single Digit Service Code Setup

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-16 : Single Digit Service Code Setup Level: Description Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes Program used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs 11-10 ~ 11-15.
  • Page 108: Acd Group Pilot Number

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-17 : ACD Group Pilot Number Level: (This Program is available for V1.5 or higher) Description Program Use Program 11-17 : ACD Group Pilot Number to assign the ACD Master Number for each ACD Group.
  • Page 109: Remote Conference Pilot Number Setup

    ISSUE 6.0 SL1100 Program 11 : System Numbering 11-19 : Remote Conference Pilot Number Setup Level: Description Use Program 11-19 : Remote Conference Pilot Number Setup to assign the pilot number to be Program used for the Remote Conference. This is the number that outside parties will call in order to connect to a conference.
  • Page 110: Dial Extension Analyze Table

    SL1100 ISSUE 6.0 Program 11 : System Numbering 11-20 : Dial Extension Analyze Table Level: Description Use Program 11-20 : Dial Extension Analyze Table to define the dial type based on three or more Program digits. This program is relevant only if digits in 11-01-01 are set to 9 (Dial Extension Analyze).
  • Page 111: Program 12 : Night Mode Setup

    ISSUE 6.0 SL1100 Program 12 : Night Mode Setup 12-01 : Night Mode Function Setup Level: Description Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the Program following chart for a description of each option, its range and default setting.
  • Page 112: Automatic Night Service Patterns

    SL1100 ISSUE 6.0 Program 12 : Night Mode Setup 12-02 : Automatic Night Service Patterns Level: Description Use Program 12-02 : Automatic Night Service Patterns to define the daily pattern of the Automatic Program Mode Switching. Each Mode Group has 10 patterns. These patterns are used in Programs 12-03 and 12-04.
  • Page 113 ISSUE 6.0 SL1100 Time Pattern 2 00 : 00 00 : 00 Mode 2 (night) Time setting 01 : 00 : 00 to 00 : 00 Mode 2 (night) Default Program Time Pattern 1 Set Time Number Start Time End Time...
  • Page 114: Weekly Night Service Switching

    SL1100 ISSUE 6.0 Program 12 : Night Mode Setup 12-03 : Weekly Night Service Switching Level: Description Use Program 12-03 : Weekly Night Service Switching to define a weekly schedule of night-switch Program settings. 21-02 : Trunk Group Routing for Extensions...
  • Page 115: Holiday Night Service Switching

    ISSUE 6.0 SL1100 Program 12 : Night Mode Setup 12-04 : Holiday Night Service Switching Level: Description Use Program 12-04 : Holiday Night Service Switching to define a yearly schedule of holiday night- Program switch settings. This schedule is used for the setting of special days when the company is expected to be closed, such as a national holiday.
  • Page 116: Night Mode Group Assignment For Extensions

    SL1100 ISSUE 6.0 Program 12 : Night Mode Setup 12-05 : Night Mode Group Assignment for Extensions Level: Description Use Program 12-05 : Night Mode Group Assignment for Extensions to a assign Day/Night Mode Program Group for each extension. Input Data...
  • Page 117: Night Mode Group Assignment For Trunks

    ISSUE 6.0 SL1100 Program 12 : Night Mode Setup 12-06 : Night Mode Group Assignment for Trunks Level: Description Use Program 12-06 : Night Mode Group Assignment for Trunks to assign a Day/Night Mode Program Group for each trunk port.
  • Page 118: Text Data For Night Mode

    SL1100 ISSUE 6.0 Program 12 : Night Mode Setup 12-07 : Text Data for Night Mode Level: Description Use Program 12-07 : Text Data for Night Mode to make an original text message which is displayed Program on an LCD of Multiline telephone in each Mode.
  • Page 119: Night Mode Service Range

    ISSUE 6.0 SL1100 Program 12 : Night Mode Setup 12-08 : Night Mode Service Range Level: Description Use Program 12-08 : Night Mode Service Range to define the changing range of toggle key for each Program Day/Night Mode. Input Data...
  • Page 120: Program 13 : Abbreviated Dialing

    SL1100 ISSUE 6.0 Program 13 : Abbreviated Dialing 13-01 : Speed Dialing Function Setup Level: Description Use Program 13-01 : Speed Dialing Function Setup to define the Speed Dialing functions. Program Input Data Item Item Input Data Description Default Related...
  • Page 121: Group Speed Dialing Bins

    ISSUE 6.0 SL1100 Program 13 : Abbreviated Dialing 13-02 : Group Speed Dialing Bins Level: Description Use Program 13-02 : Group Speed Dialing Bins to define the range of bin numbers to be used by Program each Speed Dialing group.
  • Page 122: Speed Dialing Group Assignment For Extensions

    SL1100 ISSUE 6.0 Program 13 : Abbreviated Dialing 13-03 : Speed Dialing Group Assignment for Extensions Level: Description Use Program 13-03 : Speed Dialing Group Assignment for Extensions to assign Speed Dialing Program Group for each extension. There are 32 available Speed Dialing groups.
  • Page 123: Speed Dialing Number And Name

    ISSUE 6.0 SL1100 Program 13 : Abbreviated Dialing 13-04 : Speed Dialing Number and Name Level: Description Use Program 13-04 : Speed Dialing Number and Name to store Speed Dialing data in the Speed Program Dialing areas. This program is also used to define the names assigned to the Speed Dialing numbers.
  • Page 124 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Transfer Destina- If Transfer mode is (Re- This setting can be changed only No Setting 13-04-03 tion Number fer to 13-04-03) : when Program 13-04-03 is set 1 = Internal Dial Mode other than 0.
  • Page 125: Speed Dial Trunk Group

    ISSUE 6.0 SL1100 Program 13 : Abbreviated Dialing 13-05 : Speed Dial Trunk Group Level: Description Use Program 13-05 : Speed Dialing Trunk Group to define the trunk group to be seized for each Program Speed Dialing number. If this program has an entry of 0 (no setting), then seizing a line follows the trunk access group routing of the caller’s extension (refer to Program 14-06).
  • Page 126: Speed Dial Number And Name

    SL1100 ISSUE 6.0 Program 13 : Abbreviated Dialing 13-06 : Speed Dial Number and Name Level: Description Use Program 13-06 : Speed Dial Number and Name to set up the dial number and name of each Program Speed Dial Number.
  • Page 127: Abbreviated Dial Group Name

    ISSUE 6.0 SL1100 Program 13 : Abbreviated Dialing 13-11 : Abbreviated Dial Group Name Level: Description Use Program 13-11 : Abbreviated Dial Group Name to set the name of Abbreviated Dial Group Program Name. Input Data Group Number 01 ~ 32...
  • Page 128: Program 14 : Trunk, Basic Setup

    SL1100 ISSUE 6.0 Program 14 : Trunk, Basic Setup 14-01 : Basic Trunk Data Setup Level: Description Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer to Program the chart below for a description of each option, its range and default setting.
  • Page 129 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Private Line 0 = Disable Private Line (Normal) 1 = Enable Private Line (Private Line) DTMF Tones for 0 = Disable (No) Use this option to enable (1) or disa-...
  • Page 130 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Trunk-to-Trunk 0 = Disable (Caller ID Enable (1) or Disable (0) the ability Outgoing Caller not forwarded out.) to send the original Caller ID ID through Mode 1 = Enable (Caller ID is through when the call is Forward forwarded out.)
  • Page 131 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program ISDN Queue an- 0 = send CONNECT When a VRS queue message is to 22-14 nouncement 1 = send PROGRESS be played back (configured in PRG 22-15 connect mode...
  • Page 132: Analog Trunk Data Setup

    SL1100 ISSUE 6.0 Program 14 : Trunk, Basic Setup 14-02 : Analog Trunk Data Setup Level: Description Use Program 14-02 : Analog Trunk Data Setup to set the basic options for each analog trunk port. Program Refer to the table below for a description of each option, its range and default setting.
  • Page 133 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program DP to DTMF Con- 0 = Automatic Determine how a user can convert a 21-01-03 version Options 1 = Automatic and Dial Pulse (DP) call to a DTMF call.
  • Page 134 SL1100 ISSUE 6.0 Conditions None Feature Cross Reference None Program 2-114 Program 14 : Trunk, Basic Setup...
  • Page 135: Behind Pbx Setup

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-04 : Behind PBX Setup Level: Description Use Program 14-04 : Behind PBX Setup to indicate if the trunk is installed behind a PBX. There is Program one item for each mode.
  • Page 136: Trunk Group

    SL1100 ISSUE 6.0 Program 14 : Trunk, Basic Setup 14-05 : Trunk Group Level: Description Use Program 14-05 : Trunk Group to assign trunks to Trunk Groups. You can also assign the Program outbound priority for trunks within the group. When users dial up the trunk group, they seize the trunks in the order you specify in the outbound priority entry.
  • Page 137: Trunk Group Routing

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-06 : Trunk Group Routing Level: Description Use Program 14-06 : Trunk Group Routing to set up an outbound routing table for the trunk groups Program you assigned in Program 14-05. When a user dial 9, the system routes their calls in the order (priority) specified.
  • Page 138 SL1100 ISSUE 6.0 Default Route No. Order Data Route 1 1 (Trunk group 1) 0 (Not specified) 0 (Not specified) 0 (Not specified) Route 2 0 (Not specified) 0 (Not specified) 0 (Not specified) Program 0 (Not specified) 0 (Not specified)
  • Page 139: Trunk Access Map Setup

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-07 : Trunk Access Map Setup Level: Description Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an Program extension access options for trunks. For example, an extension can place only outgoing calls on trunks to which it has outgoing access.
  • Page 140 SL1100 ISSUE 6.0 Access map No. Trunk Port No. Default 7 (T, R, H) 7 (T, R, H) 7 (T, R, H) 7 (T, R, H) 7 (T, R, H) 7 (T, R, H) Program Conditions None Feature Cross Reference •...
  • Page 141: Music On Hold Source For Trunks

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-08 : Music on Hold Source for Trunks Level: Description Use Program 14-08 : Music on Hold Source for Trunks to define a Music on Hold source for a trunk Program as COI port.
  • Page 142: Conversation Recording Destination For Trunks

    SL1100 ISSUE 6.0 Program 14 : Trunk, Basic Setup 14-09 : Conversation Recording Destination for Trunks Level: Description Use Program 14-09 : Conversation Recording Destination for Trunks to set the Conversation Program Recording destination for each trunk. If both Programs 14-09 and 15-12 define a destination, the destination in Program 15-12 is followed.
  • Page 143: Id Setup For Ip Trunk

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-11 : ID Setup for IP Trunk Level: Description Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to Program incoming and outgoing IP Trunk calls.
  • Page 144: Sip Register Id Setup For Ip Trunk

    SL1100 ISSUE 6.0 Program 14 : Trunk, Basic Setup 14-12 : SIP Register ID Setup for IP Trunk Level: Description Use Program 14-12 : SIP Register ID Setup for IP Trunk to define the SIP Register ID for IP Trunks.
  • Page 145: Ip Trunk Data Setup

    ISSUE 6.0 SL1100 Program 14 : Trunk, Basic Setup 14-18 : IP Trunk Data Setup Level: (This Program is available for V5.0 or higher) Description Program Use Program 14-18 : IP Trunk Data Setup to define the basic setting of each IP Trunk.
  • Page 146: Program 15 : Extension, Basic Setup

    SL1100 ISSUE 6.0 Program 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup Level: Description Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension. Program Input Data Extension Number Maximum eight digits...
  • Page 147 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Extension Num- 0 = Off (when set to Off This program enables/disables the the system will not ability to send calling party name in- send any outbound formation on a per station basis.
  • Page 148: Multiline Telephone Basic Data Setup

    SL1100 ISSUE 6.0 Program 15 : Extension, Basic Setup 15-02 : Multiline Telephone Basic Data Setup Level: Description Use Program 15-02 : Multiline Telephone Basic Data Setup to set up various Multiline telephone Program options. Input Data Extension Number Maximum eight digits...
  • Page 149 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Transfer Key Op- 0 = Transfer Use this option to set the operating eration Mode 1 = Serial Call (call mode of the extension Transfer key. back) The keys can be for Call Transfer, 2 = Flash Serial Calling or Flash.
  • Page 150 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Virtual Extension 0 = DSS Determine whether a Virtual Exten- Access Mode 1 = Outgoing (OTG) sion (VE) should function as a DSS (when idle Virtual 2 = Ignore key or a Virtual Extension.
  • Page 151 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Message Waiting 1 = Cycle 1 Select the cycle method that the Lamp Cycle for 2 = Cycle 2 Large LED flashes when the exten- Called Extension 3 = Cycle 3...
  • Page 152 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program Display mode of 0 = Caller ID 13-04-08 trunk incoming 1 = Memo Information 13-04-09 (V1.5 Deleted) 13-04-10 Soft Key/Naviga- 0 = Standard Mode tion key Mode 1 = Advanced Mode1...
  • Page 153 ISSUE 6.0 SL1100 Program 15-02 - Incoming Signal Frequency Patterns Incoming Signal Fre- Type Frequency 1 Frequency 2 Modulation quency Pattern External Incoming Signal High 1100 Hz 1400 Hz 16 Hz Frequency (Pattern 1) Middle 660 Hz 760 Hz 16 Hz...
  • Page 154: Single Line Telephone Basic Data Setup

    SL1100 ISSUE 6.0 Program 15 : Extension, Basic Setup 15-03 : Single Line Telephone Basic Data Setup Level: Description Use Program 15-03 : Single Line Telephone Basic Data Setup to set up various single line Program telephone options. Input Data...
  • Page 155 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Caller ID Func- 0 = Disable (Caller ID Enable (1) or disable (0) the Caller tion - For Exter- not displayed.) ID FSK signal for an external Caller nal Module...
  • Page 156 SL1100 ISSUE 6.0 Normal Outgoing Call Idle Reverse Normal Incoming Call Idle Reverse Normal Program Call Pickup Idle Reverse (1) = Off-Hook (2) = Calling/Ringing (3) = Answer (4) = Detect Hang Up (5) = On-Hook Conditions None Feature Cross Reference •...
  • Page 157: Ip Telephone Terminal Basic Data Setup

    ISSUE 6.0 SL1100 Program 15 : Extension, Basic Setup 15-05 : IP Telephone Terminal Basic Data Setup Level: Description Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP Program telephone.
  • Page 158 SL1100 ISSUE 6.0 Item Item Input Data Description Default Related Program IP Duplication Al- 0 = Not Used If there is an adapter that has one IP 15-05-01 lowed Group 1 = Group 1 address coming into it but has multi- 2 = Group 2 ple extensions off of it.
  • Page 159 ISSUE 6.0 SL1100 Item Item Input Data Description Default Related Program Calling name dis- 0 = Both name and play info via number trunk for stand- 1 = Name only ard SIP 2 = Number only 3 = None Time Zone(hour)
  • Page 160: Trunk Access Map For Extensions

    SL1100 ISSUE 6.0 Program 15 : Extension, Basic Setup 15-06 : Trunk Access Map for Extensions Level: Description Use Program 15-06 : Trunk Access Map for Extensions to define the trunk access map for each Program extension. An extension can place only outgoing calls on trunks to which it has outgoing access. Use Program 14-0