NEC SL1100 Features And Specifications Manual page 63

ISSUE 2.0
Program Num-
ber
41-19-06 ACD Voice Mail Delay Announcement - Wait Tone Type
at Message Interval
Assign what the caller hears between the messages.
41-19-07 ACD Voice Mail Delay Announcement - ACD Forced
Disconnect Time after 2nd Announcement
Assign how long the system waits after the end of the ACD
Delay Message before disconnecting.
41-19-08 ACD Voice Mail Delay Announcement - Delay Message
Interval Time
Set the time between the Delay Messages.
41-20-01 ACD Queue Display Settings - Number of Calls in
Queue
Assign the number of calls that can accumulate in the ACD
queue before the Queue Status Display (and optional queue
alarm) occurs.
41-20-02 ACD Queue Display Settings - Queue Status Display
Time
Assign how long the Queue Status display remains on the
telephone display.
41-20-03 ACD Queue Display Settings - Queue Status Display In-
terval
This option assigns the time that refreshes the Queue Sta-
tus Alarm time in queue display and causes the optional
queue alarm to occur on telephones active on a call, logged
out, or in wrap-up.
41-20-04 ACD Queue Display Settings - ACD Call Waiting Alarm
Enable/Disable the queue alarm.
41-20-05 ACD Queue Display Settings - ACD Call Waiting Alarm
Hold Time
Assign the time the Call Waiting Alarm should sound.
47-03-02 InMail Group Mailbox Options - Mailbox Number
47-03-03 InMail Group Mailbox Options - Mailbox Type
47-07-02 InMail Routing Mailbox Options - Routing Mailbox Type
47-09-03 Announcement Mailbox Options - Hang Up After
92-04-01 Extension Data Swap - 1st Extension Number
92-04-02 Extension Data Swap - 2nd Extension Number
92-06-01 Fill Command - Source Number
92-06-02 Fill Command - Destination Number (From)
Features and Specifications Manual
Program Name Default
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music Source
(default = 0)
0 ~ 64800 (seconds)
(default = 0)
0 ~ 64800 (seconds)
(default = 20)
0 = No Display, 1 ~ 84
(default = 0)
0 ~ 64800 (seconds)
(default = 5)
0 ~ 64800 (seconds)
(default = 60)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 ~ 64800 (seconds)
(default = 0)
not assigned
1
Mailboxes 01 ~ 08 = 1 (Call Routing)
Mailboxes 09 ~ 32 = 2
(Announcement)
0
Up to eight digits.
Up to eight digits.
Each extension port = 001 ~ 084 (Program
11-02)
Each virtual extension port = 01 ~ 50 (Pro-
gram 11-04)
Each extension group = 1 ~ 32 (Program
11-07)
Each ACD Group = 1 ~ 2
Each extension port = 001 ~ 084 (Program
11-02)
Each virtual extension port = 01 ~ 50 (Pro-
gram 11-04)
Each extension group = 1 ~ 32 (Program
11-07)
Each ACD Group = 1 ~ 2
SL1100
A
1-51