NEC SL1100 Features And Specifications Manual page 855

ISSUE 2.0
To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes), press the key
Use this key... For this feature...
*
Code: 03 + ext. Virtual Extension
or department
group
Operation: Press
key
Code: * 04 + orbit
(01~64)
Operation: Place
or answer call +
Press key
Code: * 06 + Net- Networking
work number (1 ~
5)
Operation: Press
key
Code: * 10 Automatic Call Dis-
Operation: Press tribution (ACD)
key to log in
Press key + 1 to
log out or 0 to can-
cel
Code: * 13 Automatic Call Dis-
Operation: Press tribution (ACD)
key
Code: * 17 Automatic Call Dis-
Operation: tribution (ACD)
*
Code: 19 Automatic Call Dis-
Operation: Press tribution (ACD)
key while on-hook
+ Vol Up or Vol
Down to scroll
Features and Specifications Manual
and enter the code (e.g., 48 for Voice Over).
When you ...
Virtual Extension
Keys Key: Place or an-
swer a call from
your virtual (phan-
tom) extension or
Virtual Extension
Key: Place or an-
swer a call to your
co-worker's exten-
sion.
Park Place a call into or
retrieve a call from
a Park Orbit.
Access a networked
trunk.
Basic Operation
Log in or out of an
ACD Group.
Rest Mode
Enable/disable Rest
Mode.
Work Time
Enable/disable
Work Time.
Queue Status
Check View the
ACD Queue Status
of each ACD group.
Key Lamp Status Also see Srvc
Slow Flash red when
ringing, On red when
busy
Fast Flash when orbit
is busy (green at origi-
nator, red at others)
None
On red when logged in
Off when logged out
On red when Rest
Mode enabled
Off when Rest Mode
disabled
On when Work Time
enabled, Flashing
(while on a call) if Auto
Work time enabled
Off when Work Time
disabled
None
SL1100
Note
Code
-
<Park>
#6
<Pickup>
* 6
- (V1.5 Added)
* 5 (V1.5 Added)
- (V1.5 Added)
- (V1.5 Added)
- (V1.5 Added)
2-25