NEC SL1100 Features And Specifications Manual page 485

ISSUE 2.0
In PRG 15-07-01, do not
assign function key as
line keys.
In PRG 15-07-01, do not
assign Trunk Group
Access or trunk group keys.
Adjust the CODEC Gain
in PRG 14-01-02 (transmit)
and PRG 14-01-03 (receive).
Stop
In PRG 21-15-01, enter the
extension number and
enter the Trunk Group
Routing route number.
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
Features and Specifications Manual
B
Is the amount of time the system waits before
placing the call in a talk state sufficient?
Yes
Should extension users
No have one-button placing
of outside calls?
Should extension users have
one-button access to trunk
No
groups for placing calls?
Do you want to adjust
Trunks
the gain (volume) for
trunks?
No
Check the Analog Trunk Timers in PRG
81-01 for compatibility with the Telco.
If desired, assign names to
trunks in PRG 14-01-01.
Do you want to set up
an Altemate Trunk
No
Route Access Code?
In PRG 11-09-02, assign the
Service Code set up in the
previous step for Altemate
Trunk Route Access.
Should extension be
Yes able to use Altemate
Trunk Route Access?
Is Trunk Group
Routing defined?
Stop
In PRG 21-01-03, enter
No
the interval for the
trunk interdigit timer.
In PRG 15-07-01, assign
function keys as line keys.
Yes
code *01+001-84
In PRG 15-07-01, assign
Yes
line group keys (*02).
For example, to make
50 the Altemate Trunk
Route Access Code.
DIAL = 5
Digit = 2
Kind = 8
In PRG 11-01-01, set
up a Service Code for
Yes
Altemate Trunk Route
Access.
In PRG 21-15-01, enter
the extension number
No
and enter 0 to
prevent routing.
SL1100
I
1-473