NEC SL1100 Features And Specifications Manual page 235

ISSUE 2.0
Program
Number
22-11-05 Transfer Destination Number 1
If the transfer operation mode is set (PRG 22-11-04), and one of the
conditions is met, calls will overflow from the target number to the des-
tination in this program. If this was a No Answer condition calls would
overflow to this program after the timer in PRG 22-01-06 expires.
22-11-06 Transfer Destination Number 2
If the transfer operation mode is set (PRG 22-11-04), and one of the
conditions is met, calls will overflow from Transfer Destination Number
1 to the destination in this program. If this was a No Answer condition
calls would overflow to this program after the timer in PRG 22-01-07
expires.
22-11-11 Incoming Ring Group Transfer
If the transfer operation mode is set (PRG 22-11-04), and one of the
conditions is met, calls will overflow from Transfer Destination Number
2 to the destination programmed in PRG 22-12-01. If this was a No
Answer condition calls would overflow to this program after the timer
in PRG 22-01-07 expires.
22-12-01 DID Intercept Ring Group
If the transfer operation mode is set (PRG 22-11-04), and the call has
overflowed through Transfer Destination Number 1 and 2, and Incom-
ing Ring Group Transfer is enabled, calls will be routed to the destina-
tion in this program.
22-01-06 DID Ring-No-Answer Time
This is the amount of time that a call will ring the DID Transfer Target
before overflowing to Transfer Destination Number 1.
22-01-07 DID Incoming Ring Group No Answer Time
This is the amount of time that a call will ring the Transfer Destination
Number 1 before overflowing to Transfer Destination Number 2.
This timer also controls the amount of time that a call will ring the
Transfer Destination Number 2 before overflowing to the DID Intercept
Ring Group.
22-11-08 Maximum Number of DID Calls
Per DID translation table a DID can be limited to only accept a certain
amount of calls. If a call is delivered to the system when the limit has
been reached, the outside caller will receive a busy tone.
22-11-09 Music on Hold Source
Per DID translation table each DID, when placed on hold, will hear ei-
ther the system Music on Hold source or the systems Background Mu-
sic source.
Features and Specifications Manual
Program Name/Description
SL1100
Assigned Data
0 = No Setting
1 ~ 25 = Ring Group 1 ~ 25
102 = Voice Mail (Call goes to the
VM pilot assigned in PRG 45-01-01.)
201 ~ 232 = Department Group 1 ~
32
401 = DISA
501 ~ 599 = DISA/VRS Message
(VRS message number 1 ~ 99)
1000 ~ 1999 = Speed Dial Bins 000
~ 999
(default = 0)
0 = No Setting
1 ~ 25 = Ring Group 1 ~ 25
102 = Voice Mail (Call goes to the
VM pilot assigned in PRG 45-01-01.)
201 ~ 232 = Department Group 1 ~
32
401 = DISA
501 ~ 599 = DISA/VRS Message
(VRS message number 1 ~ 99)
1000 ~ 1999 = Speed Dial Bins 000
~ 999
(default = 0)
0 = Disable (Calls will not be routed
to PRG 22-12.)
1 = Enable (Calls will be routed to
PRG 22-12.)
(default = 1)
0 = Not Set
1 ~ 25 = Ring Group 1 ~ 25
102 = Voice Mail (Call goes to the
VM pilot assigned in PRG 45-01-01.)
(default = 1)
0 ~ 64800 seconds
(default = 20 seconds)
0 ~ 64800 seconds
(default = 20 seconds)
0 = No Limit (Can receive as many
calls as you have available trunks.)
1 ~ 84 = 1 ~ 84 Maximum DID Calls
(default = 0)
0 = Music on Hold
1 = Background Music
(default = 0)
1-223
D