NEC SL1100 Features And Specifications Manual page 540

SL1100
Conditions
Only 1 VRS prompt message (2 minutes in length) can be recorded in a flash memory on CPU unit.
This VRS prompt message can be used for HOLD message.
Default Settings
Disabled
System Availability
M Terminals
None
Required Component(s)
None
Related Features
Analog Communications Interface (ACI)
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
Number
10-04-01 *
10-04-02
10-04-03
1-528
Program Name/Description
Music on Hold Source Selection
Assign the systems Music on Hold Source.
Music on Hold Tone Selection
Select the different internal tones that can be played.
If PRG 10-04-01 is a (0) then the following settings apply:
1 = Farewell Song
2 = Die Forelle
3 = Plaisir d'amour
If PRG 10-04-01 is a (3) then the following settings apply:
1 ~ 100 = VRS Message Number 1 ~ 100
Audio Gain Setup
Use this program to adjust the volume of the internal Music on Hold
source.
ISSUE 2.0
Assigned Data
0 = Internal MOH (Tone set by PRG
10-04-02)
1 = External MOH (Tone set by PRG
10-60-01: Audio Port No.2)
2 = Service Tone (Tone set by PRG
80-01, tone 64)
3 = VMDB (Tone set by PRG
10-04-02)
(default = 2)
1 ~ 100
See the description setting for more
details.
(default = 1)
1 ~ 63 = -15.5 ~ +15.5 dBm
(default = 32 which is 0 dBm)
Music on Hold