NEC SL1100 Features And Specifications Manual page 484

SL1100
In PRG 20-09-03, enter
0 to disable sub-address
I
In PRG 14-01-07,
enter 0 to prevent
1-472
In PRG 15-01-04,
No
enter 0 In PRG
10-03-05 enter 0
No
display by Telco.
In PRG 21-12-01, program the calling
party number data (16 digits max.)
In PRG 21-13-01, program the calling
party number data (16 digits max.)
No
outgoing calls.
In PRG 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
In the default
program extensions
In PRG 14-01-10,
No
enter 0.
If the system detects the called party is
A
Should Caller ID be included
in the call's setup message?
Should Telco display the
calling number's sub-address?
for each trunk.
for each extension.
Are outgoing
calls allowed on Yes
specific trunks?
Do you need to restrict
certain extensions from
placing calls on certain
trunks?
No
Should caller hear DTMF
Yes
confirmation tones as they
are dialing a trunk call?
If a user preselects a line, how
long should the system
remember the preselection?
No
busy, how long should the busy
tone be heard? (0-64800)
Go To
B
ISSUE 2.0
In PRG 15-01-04,
Yes
enter 1 In PRG
10-03-05 enter 1.
In PRG 20-09-03, enter
Yes 1 to enable sub-address
display by Telco.
In PRG 20-06-01,
assign Class of Service
to extensions.
In PRG 14-01-07,
enter 1 to allow
outgoing calls.
Build an out going
restriction matrix
In PRG 14-07-01
for each Access
Map, select the
Yes
access options
for each trunk.
In PRG 15-06-01,
assign extensions
to Access Maps.
In PRG 14-01-10,
enter 1.
In PRG 20-02-06,
Yes
enter the preselection
interval.
ISDN Compatibility