NEC SL1100 Features And Specifications Manual page 693

Hide thumbs Also See for SL1100:
Table of Contents

Advertisement

ISSUE 2.0
Codec
Packet Size
G.711
10 ms
G.711
20 ms
G.711
30 ms
G.711
40 ms
G.722
10 ms
G.722
20 ms
G.722
30 ms
G.722
40 ms
For example, if one site plans on making a maximum of 16 calls across the network using G.729 with
a 30 ms packet size, there must be a minimum of 376 kbps available for voice traffic. The QOS policy
for this network should allow for 376 kbps to be set aside for voice prioritization.
Conditions
• CPU software 1500 (1.50) or higher is required.
• A maximum of five nodes and a total of 168 ports total throughout the network.
InMail ports do not count against the 168 port capacity.
• This feature is only supported when networked with another SL1100; no other system types are
available.
• Each system must be individually licensed for this feature with the following license: SL-SYS-SL-
NET-LIC.
• Each system requires a VoIPDB.
• Each site must have different extension numbers assigned. The same extension number cannot
exist at multiple sites.
• Call redirect is not supported with SL Net networking.
• Dual Hold across the network is not supported.
• If calls across SL Net are to follow the local ARS routing, all sites must use ARS routing.
• SL Net is not supported through NAT.
• A Trunk Access via Networking key (
group are busy. If a user tries to access a trunk, when they are al busy, the word "Busy" will be in
the display and the user will hear Busy Tone but the key will not light up.
• Camp On across SL Net is only supported to a Busy extension.
• Hold, Transfer, and Park recall timers will follow the timer of the system where the call is on hold
(Trunk and Station). For example, a user in Site A calls a user in Site B. Site B answers the call and
places the call on hold. The hold recall time is based on Site A because the call on hold is in Site A
and not site B.
• The allowing or denying of Class of Service features in an SL Network must be performed network
wide. For example, if users in Class of Service 1 at site 1 want to block the Camp On feature a
change will have to be made in Class of Service 1 of all systems in the network.
• Paging to a networked system can only be activated by dialing a service code and the target
network's system ID.
• When a terminal or trunk is placed on hold, the Music on Hold comes from the system where the
terminal or trunk resides.
• When the Hold recall times out, the call will recall to the operator in the system where the CO trunk
resides. Hold recall timeout to the operator is controlled in Class of Service program 20-11-13.
• Forced Account Codes are not applied to calls across SL Net.
Features and Specifications Manual
Bandwidth
Codec
Used
110.4 kbps
G.729
87.2 kbps
G.729
79.5 kbps
G.729
75.6 kbps
G.729
110.4 kbps
G.729
87.2 kbps
G.729
79.5 kbps
G.723
75.6 kbps
G.723
*
06) will not light up when all trunks in the Remote site trunk
SL1100
Packet Size
Bandwidth
Used
10 ms
54.4 kbps
20 ms
31.2 kbps
30 ms
23.5 kbps
40 ms
19.6 kbps
50 ms
17.3 kbps
60 ms
15.7 kbps
30 ms
20.8 kbps
60 ms
13.2 kbps
1-681
S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents