NEC SL1100 Features And Specifications Manual page 188

SL1100
Program
Number
20-13-10
20-13-15
20-13-16
20-14-11
C
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press Conf softkey or Conf key (PRG 15-07 or SC 751: 7).
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or press Speaker key and dial 9, the Trunk
Access Code + the trunk number (default #9). You can optionally go back to step 2 to add more
parties to your Conference.
4. When called party answers, press Conf softkey or Conf key twice.
If you cannot add additional parties to your Conference, you have exceeded the system Conference
limit.
If the call being added is busy/unanswered:
With an outside call, press the line key for a call previously added to the Conference. The unanswered
call drops and the initiator is back into the Conference call.
Adding an Intercom call to an outside Conference call: Press Conf softkey or Conf key twice to re-
establish the Conference.
With only Intercom calls in the Conference: Press Conf softkey or Conf key twice to re-establish the
Conference. If the voice mail answers, there is no way to drop that extension out. You must drop the
Conference call.
5. Repeat steps 2~4 to add more parties.
Single Line Terminal
1. Establish intercom or trunk call.
2. Hookflash and dial #1.
1-176
Program Name
Class of Service Options (Supplementary
Service) - Barge-In Monitor
Class of Service Options (Supplementary
Service) - Barge-In, Initiate
Class of Service Options (Supplementary
Service) - Barge-In, Receive
Class of Service Options for DISA - DISA/Tie
Trunk Barge-In
Default
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 0
COS 01~15 = 0
ISSUE 2.0
Note
Conference