NEC SL1100 Features And Specifications Manual page 622

SL1100
• Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom calls, or
after the @ for ISDN calls.
• DSS/One Touch keys can be used for one-touch transfer.
• DSS keys can distinguish whether the telephone is set for DND/Call Forward All Calls of if the
telephone is off-hook.
• When a Ring Group call rings a station, a BLF Indication for this station shows idle or busy based on
Class of Service option (20-13-49).
• All features programmed under one touch keys are still subject to class of service restrictions.
• If you change the extension assigned to a port in PRG 11-02, the line key programming does not
follow. However, if you move the extension using the Station Relocation Feature, the line key
programming does follow.
• In order for a station to retrieve a held ICM call, the station must have an ICM key assigned in 15-07
( * 00).
P
Default Settings
The first 12 keys on a telephone are Line keys (e.g., key 01 = line 001). The remaining keys are
unassigned.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Direct Station Selection (DSS) Console
One-Touch Calling
Guide to Feature Programming
Program Number
15-07-01
20-06-01
20-07-10
20-13-18
1-610
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options (Administrator Level) - Pro-
grammable Function Key Programming (Appearance
Level)
Class of Service for Options (Supplementary Service)
- Programmable Function Key Programming (General
Level)
ISSUE 2.0
Default
Refer to Programming Manual.
Extension 101 is Class 15 and other
Extension are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
Programmable Function Keys