NEC SL1100 Features And Specifications Manual page 199

ISSUE 2.0
Program
Number
20-13-39 Class of Service Options (Supplementary Service) -
ACD Queue Status Display
20-17-01 Operator Extension - Operator's Extension Number
24-09-02 Call Forward Split Settings - CO Call Forwarding Des-
tination for Both Ring, All Call, No Answer
Operation
To set up and program the Cordless DECT Telephone:
1. Press and hold down
is displayed on the LCD.
2. Press the Up key repeatedly to scroll through the feature options for function key F1.
3. Once the preferred Line key is displayed, press MUTE key once to enter the Off-Hook Ringing ON
or OFF Mode. Press the Up key to toggle between TALK for On or NO TALK for Off.
• TALK is selected when the F1 ~ F8 function keys are programmed for CO or Call Appearance
Keys. NO TALK is selected when F1 ~ F8 function keys are programmed for functions not
requiring an off-hook state (e.g., Log On / Off or DND.)
4. Press MUTE key to advance to write the new setting and advance to the next function key (F2 ~
F8).
5. After programming F8, press MUTE key to advance to Global Off-Hook Ringing Assignment.
6. Press the Up key to turn Global Off-Hook Ringing On or Off (LCD indicates ON or OFF as
appropriate).
7. Pressing MUTE key again will bring you back to function key 1, continue programming other
function keys or go to step 8.
8. Press the TALK key to exit.
• Function keys F1 ~ F8 can be programmed as Line Keys 1 ~ 16, Redial (LNR / SPD), Answer
(ANS), Feature (FNC), or Recall. When assigned, these keys operate the same as on an NEC
multiline telephone.
• When initially installed, function keys F1 ~ F8 default to Line keys 1 ~ 8 respectively and Off-
Hook Ringing defaults to ON.
• Global Off-Hook Ringing must be ON (default) for any function key to operate with off-hook
ringing.
Switching Between the Desktop Multiline Telephone and the Cordless DECT
Telephone Using the Base Unit:
When the Cordless DECT Telephones is associated with a multiline telephone the following is
applicable:
• Switching between the cordless mode and desk mode must be done while both telephones are idle.
• A call in progress cannot be switched between the Cordless DECT Telephones and the associated
multiline telephone.
• Switching held calls between the Cordless DECT Telephone and the associated multiline telephone
is not recommended because line key LED indications are not provided.
Setting Base Key Option:
1. Remove battery from phone.
2. Press and hold digits 2 and 5 on the dial pad.
Features and Specifications Manual
Program Name
*
and #, then press the TALK key. The F1 LED flashes red and F1 = LK01
Default
COS 01 ~ 15 = 0
101
not assigned
SL1100
Note
(V1.5 Added)
C
1-187