Default Settings - NEC SL1100 Features And Specifications Manual

SL1100
making note of the digits that dial out. When hidden, the Account Code digits show as
telephone display.
Account Code Capacity
Account Codes print along with the other call data on the SMDR record after the call completes.
Account Codes can have 1~16 digits using 0~9 and #. Verified Account Codes can have 3~16 digits.
Redialed Numbers Do Not Contain Account Codes
When using the Last Number Redial, Save or Repeat Dial features, the system does not retain
Account Code information. Any number redialed with these features, the user needs to reenter an
Account Code.
If a user enters
A
dials the number as 203 926 5400
Conditions
• If a user enters a code that exceeds the 16 digit limit, the system ignores the Account Code Entry.
• If the system has Account Codes disabled, the digits dialed (e.g.,
report as part of the number dialed.
• If using Forced Account Code with Single Line Terminal you need a VRS to get the prompts to enter
the Forced Account Code.
• When you use Forced Account Code on only toll calls, and you dial a local call, you hear a beep.
• The timer set in PRG 21-01-14 is applied to toll calls and local calls.
• Speed Dial - System/Group/Station bins can contain stored Account Codes. They can be prevented
from being displayed using PRG 20-07-04.
• To simplify Account Code Entry, store the Account Code (e.g.,
press the key instead of dialing the codes.
• Account Codes appear on the SMDR report (even if they are hidden on the telephone display).
• Do not use an asterisk within a PBX/CTX access code when using Account Codes. The
the trunk to stop sending digits to the central office until another
• Account Codes for incoming calls not available for Single Line Terminals.
• When using Forced Account Codes (Unverified) for toll calls only, the station follows the timer
setting in PRG 21-01-14 for all calls.
• System Account codes are bypassed when using DISA trunks. If a user calls in via a DISA trunk, the
user is not required to enter an account code.

Default Settings

Disabled
System Availability
Terminals
Any Station
Required Component(s)
VRS for Forced Account Codes for Single Line Terminals
1-14
* 12345 * 203 926 5400 * 67890
* 67890 * . The
* , if the Last Number Redial feature is used, the system
* 67890 * is not treated as an Account Code.
* 1234
* 1234 *
* is entered.
Account Code Forced/Verified/Unverified
ISSUE 2.0
* on the
* ) appear on the SMDR
) in a One-Touch Key. Just
* , causes