NEC SL1100 Features And Specifications Manual page 689

ISSUE 2.0
• IP Trunk License
Related Features
F-Route
Guide to Feature Programming
Program Program Name
Number
10-02-01 Country Code
10-02-02 International Access
Code
84-14-13 Incoming/Outgoing SIP
Trunk for E.164
Operation
To make a call using E.164 number format:
1. Pick up the handset or press Speaker.
Dial 00441202223344#.
The system will automatically modify the required header fields of the SIP INVITE message as per the
configuration settings in the table below before then forwarding to the ITSP.
Features and Specifications Manual
Description/Comments
Enter the country code.
Enter the international access code.
When this data is set to 1, then for any outbound
SIP calls a '+' is added as a prefix to the Request-
URI, To and From header fields of the SIP mes-
sage.
When it is set to 2 then if the dialed international
access code matches the value in PRG 10-02-02
this value is removed from the number dialed and
the '+' added as a prefix to the Request-URI, To
and From header fields of the SIP Message.
SL1100
Assigned Data
Dial (up to four digits): 0~9,
* , #
(default = Not Assigned)
Dial (up to four digits): 0~9,
* , #
(default = 00)
0...OFF
1...ON
2...International Access
Mode
(default = 0)
1-677
S