NEC SL1100 Features And Specifications Manual page 480

SL1100
Programming Flowchart for ISDN-PRI - Answering Calls
I
In PRG 10-03-08,
In PRG 21-01-03, enter
the interval for the trunk
interdigit timer.
In PRG 20-19-04,
set the timer to '0'.
1-468
In PRG 10-03-01, determine the mode of
the IP4WW-1PRIU-C1(0=not set, 1=T-Bus)
In PRG 10-03-03,
No
enter '0'.
In PRG 10-03-04, select the Layer 3 timer type (1-5). The timer
value is set up in PRG 81-06 (T-Bus)
In PRG 10-03-06, determine the length of cable used to connect from the
CSU to the IP4WW-1PRIU-C1
(0=0-40m, 1=40-81m, 2=81-122m, 3=122-162m, 4=162-200m).
Enblock
enter '0'.
In PRG 14-05-01, assign PRI lines
to trunk groups (determines
available channels for PRI lines).
Is the amount of time the
system waits before placing
No
the call in a talk state
No
Start
Is the CRC
Multi-Frame
Yes
(CRC4)
used?
Is the Dial
Sending Mode
overlap
Enblock or
Overlap
Sending?
sufficient?
Yes
Do you wish to have
the Caller ID
Yes
Name displayed for
incoming calls?
Go To
A
ISSUE 2.0
In PRG 10-03-03,
enter '1'.
In PRG 10-03-08,
enter '1'.
In PRG 10-03-09, selent either
Keypad Facility (0) or
Called Party Number (1) for
the dial information element.
PRG 20-19-04, set the
timer to at least '10'
seconds.
ISDN Compatibility