NEC SL1100 Features And Specifications Manual page 174

SL1100
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
C
Central Office Calls, Placing
Code Restriction Override/Toll Restriction Override
Code Restriction, Dial Block/Toll Restriction, Dial Block
Direct Inward System Access (DISA)
PBX Compatibility/Behind PBX
Multiple Trunk Types
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
Number
14-01-08
21-04-01 *
21-21-01
15-02-30
1-162
Program Name/Description
Toll Restriction
Enable or Disable, on a per trunk basis, toll restriction for the trunk. If
enabled and the trunk is used system toll restriction will be applied. If
disabled and the trunk is used no toll restriction will be applied, the
trunk will have free dialing.
Toll Restriction Class for Extensions
Per Day/Night Mode assign a toll restriction class to each extension.
It is recommended to not use class 1, because by default all trunks
are assigned in class 1.
Toll Restriction Class for Trunks
Per Day/Night Mode assign a toll restriction class to each trunk.
It is recommended to not use class 2, because by default all stations
are assigned in class 2.
Toll Restriction Class for Virtual
This program is used to select the Toll Restriction class when making
an outbound call from a virtual (PRG 15-02-21 set to a 1).
ISSUE 2.0
Assigned Data
0 = Restriction Disabled (Toll re-
striction will not be applied to calls on
this trunk.)
1 = Restriction Enabled (Toll restric-
tion will be applied to calls on this
trunk.)
(default = 1)
1 ~ 15 = Toll Class 1 ~ 15
(default = 2)
1 ~ 15 = Toll Class 1 ~ 15
(default = 1)
0 = Virtual Extension (Follows virtual
extension Toll Class in PRG 21-04.)
1 = Real Extension (Follows physical
stations Toll Class in PRG 21-04.)
(default = 1)
Code Restriction/Toll Restriction