Table 1-47 Feature Support Table For Standard Sip Device - NEC SL1100 Features And Specifications Manual

ISSUE 2.0
• T.38 (Fax) is supported for 3rd Party SIP "IP Single Line Terminal (SIP)" station ports.
• PRG 15-03-03 must be set to 1 (Special) at the receiving terminal in order for T.38 to function.
• When using 3rd party SIP stations, the SIP server name can not contain a parenthesis.
• The Exclusive Hold Recall Timer is used when an internal call from a Single Line telephone or 3rd
party SIP telephone is placed on Hold.
• Each SIP phone that is registered to the SL1100 requires the following license: SL-IP-SIPEXT-1 LIC
(License Code 5111).

Table 1-47 Feature Support Table for Standard SIP Device

Feature Name
Abbreviated Dialing/Speed Dial
Account Code - Forced/Verified/
Unverified
Account Code - Forced/Verified/
Unverified
Account Code Entry
Account Code Entry
Alarm
Alarm Reports
Alphanumeric Display
Analog Communications Interface
(ACI)
Ancillary Device Connection
Answer Hold/Automatic Hold
Attendant Call Queuing
Automatic Call Distribution (ACD)
Automatic Release
Automatic Route Selection (ARS/F-
Route)
Background Music
Barge-In
Call Arrival (CAR) Keys
Call Duration Timer
Call Forwarding
Call Forwarding with Follow Me
Call Forwarding, Off-Premise
Call Forwarding, Off-Premise
Call Forwarding/Do Not Disturb
Override
Call Monitoring
Call Redirect
Call Waiting/Camp-On
Features and Specifications Manual
Standard SIP
No
Yes Depending on SIP device the account code may
have to be part of the dial string.
No
Yes Depending on SIP device the account code may
have to be part of the dial string.
No
No
No
Yes Some SIP devices have Alphanumeric Displays
and are backlit. However, the display is not upda-
ted with CPU messages.
No
No
No
No
No
Yes
Yes
No
No
No
No Call Duration timer is a function of the client de-
vice and is not the system timer.
Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and from the SIP
device using dial access codes. In some cases
Call Forwarding can be set on SIP device itself but
this not system side forwarding.
No
Yes Can be programmed in 24-09-xx, through feature
code from administrator desk set and in some ca-
ses from the SIP device using dial access codes.
No
No
No
No
No
Comments
SL1100
Note
I
(V1.5 Added)
1-443