PCPro via DDI to 830
Remote Access - PCPro via DDI to 830
Before you can use PCPro to communicate with the XN120 you must establish a 'dial up
session' using the ISDN terminal adapter connected to your PC.
You will also need to route one of the DDI numbers within the XN120 to destination 830 in
program 22-11-02.
Before creating the dial up session ensure that your ISDN terminal adapter is installed and
available on your PC.
Creating a Dial Up Session for Remote Access via DDI to 830.
1. Click Start -> Settings -> Network
Connections and select Create New
Connection
2. In the New Connection screen click Next
3. Select the Connect to the network at my
workplace and click next
4. In the Network Connection screen select
Dial up connection and click Next
17