NEC SL1100 Features And Specifications Manual page 20

SL1100
Program
Number
15-14-01
15-14-02
11-11-39
A
Operation
To store a Speed Dialing number (display telephones only):
1. Press Speaker key.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Initially, there are 900 System Speed Dialing codes. Group Speed Dialing codes must be defined in
programming.
4. Dial telephone number you want to store (up to 36 digits).
Valid entries are 0~9, # and
key.
Enter @ for await answer before sending following digits on ISDN.
5. Press Hold key.
1-8
Program Name/Description
Programmable One Touch Keys - Number
If PRG 15-02-60 is set to a (0) then the stations personal speed dial
entries are programmed here.
Per key number (1 ~ 10) assign the telephone number that is to be
called when the bin is accessed.
Programmable One Touch Keys - Name
Per key number (1 ~ 10) assign a name to be used when searching
through the directory.
If a name is not assigned for a speed dial bin the speed dial entry will
not be listed in the directory.
Station Speed Dial Number Entry
If PRG 15-02-60 is set to a (0) assign the service code used for stor-
ing station speed dialing name and number. These entries will be stor-
ed in PRG 15-14.
The service code assigned must be within your valid numbering plan
in PRG 11-01-01.
*
. To enter a pause, press Transfer key. To store a Flash, press Flash
ISSUE 2.0
Assigned Data
Maximum of 36 digits (0 ~ 9,
@, P, R)
@ = Wait for Answer Supervision -
ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk Only
(default = Not Assigned)
Maximum of 12 characters
(default = Not Assigned)
Maximum of 8 digits (0 ~ 9,
(default = 755)
Abbreviated Dialing/Speed Dial
* , #,
* , #)